Advertisement
_i,
WARNING:
If any parts are broken or missing, do not attempt to plug in the
power cord or operate the pruner until the broken or missing parts are replaced.
Failure to do so could result in possible serious injury.
WARNING:
Do not attempt to modify this pruner or create accessories
not
recommended
for use with this tool. Any such alteration
or modification
is misuse
and could result in a hazardous
condition
leading to possible serious injury.
UNPACKING
This product has been shipped completely
assembled.
•
Carefully
remove the tool and any accessories
from the box. Make sure that all
items listed in the packing
list are included.
•
Inspect the tool carefully to make sure no breakage
or damage occurred
during shipping.
•
Do not discard the packing material
until you have carefully inspected
and
satisfactorily
operated
the tool.
•
If any parts are damaged
or missing,
please refer to the numbers listed on the
back page of operator's
manual.
PACKING
LIST
Pruner, Blade cover, Charger, Operator's
manual
The battery
in your new tool is not fully charged!
First, read the safety rules, and then follow
the instructions
in the sections
entitled
"Important
charging
notes" and "Charging
the battery".
Important
charging
notes
• Longest
life and best performance
can be obtained
if the batteries are charged
at normal room temperature.
• While charging,
the charger will normally become warm.
• If the batteries do not charge properly, verify the current at the outlet by plugging
in a lamp or other tool.
• The tool should be recharged
when it fails to produce sufficient
power on jobs
that were previously
done easily. Do not continue to use the tool under these
conditions.
Repeat the charging procedure.
• Unplug the charger from the power supply before disconnecting
it from the tool.
Unplug charger before attempting
to clean.
• Battery life depends on usage, storage temperature
and time.
• The charger is intended to be used in a vertical or floor-mounted
position.
Page 10
74331
Manual_4V
Pruner_09
±203
Advertisement
