Drillingto A Specific Depth; Lockingchuck Desired Depth - Craftsman 113.213170 Owner's Manual

DRILLING TO A SPECIFIC DEPTH
To drill a BLIND hole (no! all the way lhrough) to a
given depth, proceed as follows.
1. Mark the deplh of lhe hole on the side of lhe work-
piece.
2. Loosen the depth scale lock.
3. With the switch OFF, bring the drill down until the
TiP or lips of the drill are even with the Mark.
4. Turn the depth scale counterclockwise until it stops
moving.
5. Tighten the depth scale lock.
6. The drill will now be stopped at this depth until the
depth scale is readjusted.
DEPTH
SCALE LOCK
DEPTH
SCALE
MARK
!:
ANOTHER WAY -- DEPTH SCALE
1. With the switch OFF, loosen the depth scale lock.
-2. Turn the depth scale clockwise until the depth scale
indicator points to the desired drilling depth on the
depth scale.
3. Tighten the depth scale lock:
4. The chuck or drill will now be stopped after traveling
downward the distance selected on the depth
scale.
LOCKING CHUCK DESIRED DEPTH
1. With the switch off--loosen the depth scale lock.
2. Turn the feed handles until the chuck is at the
desired depth. Hold feed handles at this position.
DEPTH
SCALE
DEPTH
POINTER
TIP TOUCHES
WORKPIECE
0 .....................