Printing Display Contents And Instrument Settings; Transfer Formats - Epson USN 52R Operating Manual

Interfaces, Peripherals
Printing display contents and instrument
settings
Operation:
– Set COPY MODE to DISP + PDUMP.
– If necessary, optimize the A-Scan.
or
– Set COPY MODE to PARAMETER DUMP.
– With A activate printing.
8-10

Transfer formats

On the following page you will find an overlook concern-
ing the data formats by transfer of single measurement
values. The data format is dependent on the selected
unit of measure and the resolution:
• X.XXX IN:
• XX.XX IN:
• XX.XX MM:
• XXX.X MM:
Issue 05, 02/00
Transferring measurement values
Units of measure INCH,
1 before and 2 behind the point
Units of measure INCH,
2 before and 2 behind the point
Units of measure METRIC
2 before and 2 behind the point
Units of measure METRIC
3 before and 1 behind the point
Krautkramer USN 52R/USN 52L