Download Print this page

Craftsman 25911 Operator's Manual

Homeowner's series - chest
Hide thumbs Also See for 25911:

Advertisement

Available languages

Available languages

PART#
F1819
OPERATOR'S
MANUAL
RRFrSMRN
HOMEOWNER'S
SERIES - CHEST
MODEL # 25911
CALL 1=800-4MY=HOME OR (1=800-366-7278)
FOR SERVICE
PARTS. Refer to Service Parts Drawing for full listing of Service
Parts.
LOCATING MODEL # iNFORMATiON
Model numbers and other information required for service parts is
located on a label on the interior right side of the top most drawer.
• The maximum weight for each drawer should be no more than
25 pounds.
• Empty weight of the unit is 37 Ibs
• The maximum product weight, including contents, should be no
more than 125 pounds.
• For casters, use high quality bearing grease, (yearly).
• Lubricate the slides with grease or equivalent(twice
yearly.)
• Lubricate lock with graphite, (yearly).
Ball bearing slides
Friction slides
/L_
• Periodically the drawer fronts, drawer trim, and other surfaces
should be cleaned with a mild detergent and water.
• Auto wax will preserve the unit's luster finish. Apply the wax as to
a car. The wax will also help protect the unit against scratches.
• Grease and oil can be removed with most standard cleaning
fluids. For safety, use a nonflammable cleaning fluid.
• If drawer liners are supplied, it is recommended
they are used
to protect the finish inside the drawers and to make the drawers
easier to clean. The drawer liners may be cleaned with soap and
water.
DANGER
_,
is used to indicate a hazardous situation which,
if not avoided, will result in serious injury or death.
WARNING
z_
indicates a hazardous situation which, if not
avoided, could result in serious injury or death.
CAUTIONis used to indicate a hazardous situation which, if not
avoided, _
result in minor injury, moderate injury, or property
damage.
CAUTION:
Read and follow all Safety Rules and Operating
instructions before first use of this product.
DANGER
_,
• DO NOT stand on this product. You may fall or cause product to
tip.
• DO NOT open more than one drawer. The product may become
unstable and tip.
• DO NOT step in the drawers. You may fall or cause product to
tip.
• DO NOT mount this product on a truck bed or any other moving
object.
• DO NOT move the product prior to closing and locking all the
drawers. The drawers could come open and make the product
unstable and tip.
WARNING
Z_
• WEAR SAFETY GLASSES
when removing or repositioning the
slides.
• DO NOT pull this product when moving it. Push the product to
prevent personal injury.
• USE THE BRAKES when not moving this product. This will
prevent the product from roiling.
• DO NOT alter this product in any manner. For example, do not
weld external Iockbars or attach electrical equipment.
• Keep the product on level surfaces. The product may become
unstable and tip if stored or moved on an uneven surface.
• BE CAREFUL when closing the cover. Remove hands before
the cover closes completely.
CAUTION
• This product is not designed to be directly lifted with a fork lift, or
to be towed with any mechanical devices.
• The maximum weight for each drawer should never be exceed-
ed.
• Only transport this product empty. Properly secure when trans-
porting.
• DO NOT exceed maximum product weight, including contents.
See Operations Sections: Capacities for more information.
Distributed
by Sears Brands Management Corporation,
Hoffman Estates, IL 60179
F1819

Advertisement

loading

Summary of Contents for Craftsman 25911

  • Page 1 PART# F1819 OPERATOR'S MANUAL RRFrSMRN Friction slides Ball bearing slides HOMEOWNER'S SERIES - CHEST • Periodically the drawer fronts, drawer trim, and other surfaces should be cleaned with a mild detergent and water. MODEL # 25911 • Auto wax will preserve the unit's luster finish. Apply the wax as to a car.
  • Page 2 Tools Required: NOTE: Not all operation instructions will relate to your model. 3/8 inch wrench 5/16-inch drill bit TO LOCK CHEST HARDWARE INCLUDED: Process: - Make sure drawers are fully closed. - Insert the Iockbar (which stores in the top tray), tabbed end up, into the slot in the top tray and down into the slot 1/4 - 20 x 5/8"...
  • Page 3: Installing Drawers

    Lever Style - Lift or lower (depending on the slide) the release lever on both sides, (this allows the slides to ride iNSTALLING DRAWERS over the stops.) Pull out to remove. Ball bearing slide - Pull slides and slide carrier out to fully extended position (see illustration.) Hold the slide on the cabinet while aligning it with the slide on drawer.
  • Page 5 MANUAL DE USUARIO RnFrSMRN Correderas de friction SERIE PARA PROPIETARIOS DE VIVIENDAS - BAOL • Lubrique la cerradura con grafito (anualmente). • Limpie con detergente suave y agua los frontales y los bordes MODELO NO 25911 laterales de los cajones y las demas superficies. •...
  • Page 6 HERRAMIENTAS NECESARIAS: NOTA: No todas las instrucciones de uso se refieren a tu modelo. Llave Inglesa de 9.525mm (Llave de 10mm) Broca de 5/16 de pulgada PARAASEGURAR LA CAJA PORTAHERRAMIENTAS: PIEZAS INCLUIDAS: • Compruebe que las gavetas esten completamente cerradas. •...
  • Page 7 INSTALACI6N DE GAVETAS Estilo palanca - Levante o baje (dependiendo de la corredera) la palanca de liberaci6n en ambos lados (esto permite que las Correderas de rodamientos esfericos = hale hacia correderas pasen sobre los topes.) Jale hacia afuera para retirar. afuera las correderas y el soporte de las correderas hasta que...