Printing On Cds/Dvds With A Commercially Available Software Package; Standard Mode; Loading Cds/Dvds - Epson PP-100 User Manual

❏ The quality of the blank disc determines write quality. It is recommended to use only the
specified disc type.
❏ It is recommended that you run a compare while writing data.
❏ Making a backup is recommended if the data is important. Recorded data may degrade
over long storing periods. It is recommended to make backups periodically.
❏ Do not shock or vibrate the product while reading or writing, as this may result in
malfunction of the drive or make the disc unusable.
❏ Do not use a cracked, warped, or deformed discs because it may break in pieces inside
the product and cause malfunction or injury.
❏ A disc may become unreadable or unwritable if it has a small scratch or dirt; therefore,
please handle it with care.
❏ Do not touch both surfaces when holding a disc.
❏ Created discs may not be readable in some players.
❏ The completed job display of EPSON Total Disc Monitor shows the number of
successes, number of failures, and number of discs printed.
Printing on CDs/DVDs with a commercially available software
package
When you print on CDs/DVDs with a commercially available software package that
supports CD/DVD printing, you have to make the following settings.
Size
Type
Margins on all sides

Standard Mode

Loading CDs/DVDs

Follow the steps below to load CDs/DVDs.
124 x 124 mm (4.88 x 4.88")
CD/DVD Label, CD/DVD Premium Label, or EPSON
Specified CD/DVD Label
2 mm (0.08")
22
Publishing Discs