Installing The Tv; Carrying The Tv; Preparation For Table-Top Stand - Sony BRAVIA KDL-40Z4100 Operating Instructions Manual

1. Installing the TV
This TV can be mounted on a wall using a W_fll-
Mount Bracket or placed on a TV stand (each sold
separately). This section will explain:
• How to carry the TV
• Preparation for a Table-Top stand
• Preparation for a Wall-Mount Bracket
• Installation against a wall or enclosed area
• Bundling the connecting cables
• Securing the TV
Follow the assembling steps required to place on a
TV stand.
Remove the Table-Top Stand and screws from
tile carton. Tile screws can be found in tile
accessory bag.
Table-Top Stand
Be sure to follow these guidelines to protect your
property and avoid causing serious injury.
• Before carrying the TV. disconnect all cables.
• Carrying the large size TV requires two or more
people.
• When carrying the TV. place your hand as
illustrated and hold it securely. Do not subject the
TV to shocks, vibration, or excessive force.
TV Unit
Stand Rear
Cover
Place the Table-Top Stand on a level and
stable surface.
/
• Lift the TV by placing your palm directly
underneath the panel but do not put stress on the
LCD panel.
J
I{ IIII
• Do not lift tile TV from tile bottom center.
6
3
Gently slide tile TV unit onto tile neck of tile
Table-Top Stand and align the screw boles.
• Do not put stress on the LCD panel or the frame
around the screen.
• Be careflll to not pinch your hands or the AC power
cord when you install the TV unit to the Table-Top
Stand.
4 Use the supplied screws to attach the TV unit
to the Table-Top Stand (refer to the "Attaching
the Table-Top Stand" flyer).
If an electlic
screwdriver is used, set
the torque to tighten at
approximately 1.5 N.m,
15 Kgf.cm.