Sony Grand Wega KF-60DX100 Operating Instructions Manual page 84

Other information
Problem Possible Remedies
Fhere is no twin picture or it is C.l Be sure your twin picture is set to a video source/channel that has a program amng.
just stahc _J You may be tuned to a video input with nothing connected to it. Try cycling
hrough your video inputs using TV/VIDEO
Twin View is not set to i_ceive a slgnal from the AUX input. If you have
connected a VCR, DVD player or satellite receiver to the AUX input on the LCD
pro)ection TV. it will not show in the seconc plcture.
You get the same program in the _ Both ma I be set to the same channel. Try changing channels m either the main
window picture as m the mare picture or the window picture.
picture r.l You may be running all your channels through a cable box. The cable box will
only unscramble one signal at a time. so you cannot use the Twin View feature. If
possible run a direct cable to your LCD projection TV's VHF/UHF input _ this will
only work if your cable system provides an unscrambled signal.
You cannot get anything but TV k.l Be sure the video label has not been set to skip your video inputs. See the Setup
channels in your second picture menu on page 68.
Favorite Channel does nol LI Verify that Favorite Channel is set to Manual in the Channel metal, see
display your choices --Favorite Channel" on page 62_.
Some video sources do no1 IJ Ensure that Video Label is not set to "Skip" {see "Video Label" on page 68,
appear when you press TV
VIDEO
84