Printing method Nozzle configuration Black Color Resolution Print direction Input buffer Part number 1064865 7/01 EPSON Stylus C60 Size Letter Letter Letter Legal 4 × 6 inches Letter - 20 sheets Letter - 500 sheets Letter - 100 sheets Panoramic...
Power Approx. 17 W (ISO consumption 10561 Letter Pattern) Approx. 4 W in standby mode * Check the label on the back of the printer for your printer’s voltage. Environmental Temperature Operation 50 to 95 °F (10 to 35 °C) Storage* −...
Page 3
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, EPSON cannot attest to the quality of any non-EPSON brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs.
If the error light flash lights are still flashing, contact your dealer or EPSON. Installing the First Ink Cartridges 1. Turn on the printer. 2. Open the output tray and printer cover.
❏ Some special media have a cut corner that you need to position on the upper right. ❏ You can load the following number of sheets of EPSON special media: For this paper name...
Replacing an Ink Cartridge To ensure good results, use genuine EPSON ink cartridges and don’t refill them. Other products may cause damage to your printer not covered by EPSON’s warranty. You cannot print if either cartridge is empty. Leave the empty cartridge installed until you have obtained a replacement.
Running the Head Cleaning Utility 1. Make sure the printer is turned on but not printing, and the red b error light is off. (If the red light is flashing or on, you may need to replace the ink cartridge; see page 6 for details.)
If you move your printer some distance, you need to prepare it for transportation in its original box or one of a similar size. 1. Turn on the printer, wait until the print head locks in the far right position, then turn off the printer.
Keep the printer level as you transport it. After transporting the printer, remove the tape securing the print head and test your printer. If you notice a decline in print quality, clean the print head (see page 7); if output is misaligned, align the print head (see page 8).