Manual Exposure - Canon EOS REBEL XS Instruction Manual

M' Manual Exposure
You can set both the shutter speed and aperture as desired, With flash, the
flash exposure will be set automatically to match the aperture that was set,
The flash sync speed can be set within 1/200 sec, to 1/30 sec, or to bulb,
* <M> stands for Manual.
1
<_> <Av[_> + <_>
Set the Mode Dial to <M>.
Set the shutter speed and aperture.
® To set the shutter speed, turn the
<_> dial.
® To set the aperture, hold down the
<Av_> button and turn the <_> dial.
Standard exposureindex ,7;
Exposure level mark
Set the exposure and take the
picture.
® The exposure level indicator in the
viewfinder indicates the exposure
level up to _+2stops from the standard
exposure index at the center. While
you change the shutter speed and
aperture, the exposure level mark will
move. You can decide which
exposure level to set.
Bulb Exposures
Instep2,turnthe <_> dial left t oset<BULB>. A bulbexposure
keeps the shutter open for as longas you holddown theshutter button.
It can be used tophotographfireworks, etc. The elapsedexposure time
will be displayed on the LCD monitor.
For bulb exposures, using a Remote Switch (p.164) is recommended.
@ _ since bulb exposures pr0duce more noise than Usual the image Willi00k
rough or grainy. Youcan reduce this noise by setting the [l'_t_ C ustom
Funct!0ns (C.Fn)] menu's [Long eXP-n0!Se reduction] (p:155) to [1
Auto] or [2: On]_
_The Auto Lighting Optimizer (p.156)will not work.
75