Anchor Bolts - Toshiba G8000 Series Installation Manual

10.3 Anchor bolts

Tighten the anchor bolts to secure the UPS on the floor. Tightening detail is shown in Figure 10.2.
Anchor bolts of 12mm (1/2") diameter are to be used, clearance holes of 16mm (5/8") diameter are provided
in the UPS base.
< 100~225kVA >
Back
4 x 12mm-Dia.(1/2")
Front
100/125kVA: 1,050mm (41" 11/32)
150/180/225kVA: 1,170mm (46" 1/16)
Figure 10.3 - Hole locations and dimensions for anchor bolts.
4 of 16mm-diameter
(5/8") screw holes
Anchor Bolt
550mm
(21" 21/32)
26
4 screw holes
(Side View)
Figure 10.2 -
Anchor bolt tightening
< 250/300kVA >
8 x 12mm-Dia.(1/2")
575mm 564mm
(22" 5/8) (22" 3/16)
650mm
(25" 19/32)
575mm
(22" 5/8)