Status of the UPS, measurements, and alarms are all indicated on the LCD screen.
Tower Unit
6.4
Normal Display
The UPS status is shown in the normal display mode. The UPS Meters display and the
Setting display may be accessed by pressing the Return button on Tower Unit and
FUNC button on the Rack Unit.
6.5
UPS Meters Display
Listed below are the parameters available for viewing from the UPS meters display.
Press this button to scroll through the parameters.
LCD Message
O/P VOLT= xxx.xV
O/P FREQ= xx.x Hz
I/P VOL T= xxx.xV
I/P FREQ= xx.x Hz
BAT VOLT= xx.xV
O/P LOAD%= xx%
O/P W= xW
O/P VA= xVA
O/P CURR= xA
Rack Unit
Figure 3 Control panel
Description
Shows Output AC Voltage
Shows Output Frequency
Shows Input AC Voltage
Shows Input Frequency
Shows Battery Voltage
Shows Load % of Max Load
Shows Output Watts
Shows Output VA
Shows Output Current
19