5. Check your wireless card's or adapter's device settings.
(Depending on the type of card or adapter you're using, some of
the settings may be different than those listed here.)
■
Set the Network Type to
Set the SSID to match the name assigned to the access point
■
(which should also be the projector's ESSID).
Make sure Encryption is
■
encryption on the projector.
6. Click the
General
adapter is enabled.
7. When you're done, click
box.
8. Right-click the
Wireless Network Connection
select
. You see this screen:
Properties
Infrastructure
if you have not set up
Disabled
tab and make sure that your wireless card or
to close the wireless properties dialog
OK
.
icon again and
Presenting Through a Wireless Network
61