Note
If you do not know the correct password, see "Password
Problems" in Appendix D,
Changing a Power-on Password
To change your power-on password, follow these steps:
1.
If you do not have a hard disk, insert your Startup diskette
in drive A.
2. Turn on or reset the computer. At the key prompt, enter
your current power-on password followed by a forward slash.
After the slash, enter the new password you want to use. For
example, if your current password is
change it to ABC, type:
123/ABC
Do not use characters requiring the
$, @,
recognize the
access the system.
The screen does not display what you type.
3.
Press
computer loads MS-DOS.
3-8
Using Your Computer
or
*, in your new password. The computer does not
Shift
key when you use your password to
Enter.
A happy face character appears and then the
123
and you want to
Shift
key, such as