However, if this screen appears and you are trying to run a
program other than Setup, follow these instructions to reach
the Operation Menu:
1. Use [rl to highlight Exit; then press [Enl#l. At the bottom
of the next screen, you see the following menu:
2. Press I to highlight Exit without saving; then
press I. You see the Operation Menu. On this menu,
you can use the arrow keys to highlight the name of the
program you want to run and press [Enrsrl.
3. Now follow the remaining steps in the appropriate section of
your User's Guide to use the program you selected.
Copyright Q 1992 by Epson America, Inc.
Torrance, California
Change settings
Exit without saving
**EXIT AND
SAVE**
Y73899200300