Related Manuals for Sony HT DDW1600
Summary of Contents for Sony HT DDW1600
- Page 1 3-094-056-13(1) Home Theatre System Operating Instructions HT-DDW1600 ©2007 Sony Corporation...
- Page 2 WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. And don’t place lighted candles on the apparatus.
-
Page 3: About This Manual
This receiver incorporates High-Definition Multimedia Interface (HDMI ) technology. About This Manual HDMI, the HDMI logo and High-Definition • The instructions in this manual are for model Multimedia Interface are trademarks or registered HT-DDW1600. In this manual, models of area trademarks of HDMI Licensing LLC. -
Page 4: Table Of Contents
Table of Contents Getting Started Enjoying Surround Sound Description and location of parts....5 Enjoying Dolby Digital and DTS Surround sound (AUTO FORMAT DIRECT)..52 1: Installing speakers ........15 Selecting a pre-programmed sound field ..54 2: Connecting speakers........17 Using only the front speakers and sub 3a: Connecting the audio components..19 woofers (2CH STEREO) ....... -
Page 5: Getting Started
Getting Started Description and location of parts Receiver Front panel MASTER VOLUME MULTI CHANNEL DECODING DISPLAY INPUT MODE TUNING MODE INPUT SELECTOR – TUNING AUTO CAL AUTO CAL MIC SUR BACK MEMORY/ X-ROUND ENTER DIMMER SLEEP DECODING A.F.D. MOVIE MUSIC MODE SPEED VIDEO 3 IN/PORTABLE AV IN... - Page 6 Name Function K INPUT Turn to select the input SELECTOR source to playback (page 37, 39, 40, 58, 59, 60, 61, 62, 65, 67, 68, 69). L MOVIE, Press to select sound fields MUSIC (MOVIE, MUSIC) (page 54). M A.F.D. Press to select A.F.D.
- Page 7 About the indicators on the display D EX PL IIx DTS -ES 9 6 / 2 4 MEMORY COAX NEO:6 D.RANGE MONO Name Function Name Function A SW E OPT Lights up when the audio signal Lights up when INPUT MODE is output from the SUB is set to “AUTO IN”...
- Page 8 Name Function K NEO:6 Lights up when DTS Neo:6 Cinema/Music decoder is activated (page 53). L COAX Lights up when INPUT MODE is set to “AUTO IN” and the source signal is a digital signal being input through the COAXIAL jack, or when INPUT MODE is set to “COAX IN”...
-
Page 9: Rear Panel
Rear panel DIGITAL OPTICAL ANTENNA DVD IN VIDEO 2/BD IN HDMI VIDEO 2/ BD IN COAXIAL SURROUND BACK VIDEO OUT VIDEO IN VIDEO IN VIDEO OUT VIDEO IN SAT IN DVD IN VIDEO 1 IN MONITOR OUT DMPORT MONITOR COMPONENT VIDEO AUDIO IN AUDIO IN AUDIO OUT... - Page 10 F AUDIO INPUT/OUTPUT section AUDIO IN/ Connects to an White (L) OUT jack Super Audio CD player or CD Red (R) recorder, etc. (page 19). G D-LIGHT SYNC OUT section D-LIGHT Connects to a SYNC OUT lighting device jack (page 28). You can watch the selected input image when you connect the HDMI OUT or MONITOR OUT jack to a TV (page 23).
- Page 11 You can use the supplied remote RM-AAU013 (models of area code MX, E51, AR only) or RM- AAU015 (models of area code SP, AU, TH only) to operate the receiver and to control the Sony audio/video components that the remote is assigned to operate. For details, see “Changing button assignments”...
-
Page 12: Amp Menu
TV on (MOVIE). or off. MUSIC Press to select sound fields AV ?/1 Press to turn on or off the Sony (MUSIC). (on/standby) audio/video components that E AMP MENU Press to display the menu of the remote is assigned to the receiver. - Page 13 Name Function Name Function L TV CH +/– O RETURN/ Press TV CH +/– and TV (M) Press to at the same time to select EXIT O – return to the previous menu. preset TV channels. – exit the menu while the menu or on-screen guide of PRESET +/–...
-
Page 14: Auto Cal
Notes Name Function • Some functions explained in this section may not S >10/ Press to select work depending on the model. – track numbers over 10 of the • The above explanation is intended to serve as an VCR, satellite tuner or CD example only. -
Page 15: 1: Installing Speakers
1: Installing speakers This receiver allows you to use a 6 channel speaker with 4 sub woofers system. Since the sub woofer does not emit highly directional signals, you can place it wherever you To fully enjoy theater-like multi channel want. - Page 16 • Contact a screw shop or installer regarding the wall The screws should protrude 5 material or screws to be used. • Sony is not responsible for accident or damage to 7 mm. caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc.
-
Page 17: 2: Connecting Speakers
2: Connecting speakers DVD IN VIDEO 2/BD IN HDMI SURROUND BACK VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT SAT IN DVD IN VIDEO 1 IN MONITOR OUT MONITOR COMPONENT VIDEO AUDIO IN AUDIO IN AUDIO OUT AUDIO IN AUDIO OUT FRONT SURROUND... - Page 18 To connect the speaker correctly Check the speaker type by referring to the speaker label* on the speakers. Character Speaker type Location of on speaker speaker label label Front left Rear panel Front right Rear panel Surround left Rear panel Surround right Rear panel Surround back...
-
Page 19: 3A: Connecting The Audio Components
3a: Connecting the audio components Connecting a Super Audio CD/CD player or CD recorder The following illustration shows how to connect a Super Audio CD player, CD player or CD recorder. After connecting your Super Audio CD player, CD player or CD recorder, proceed to “3b: Connecting the video components”... -
Page 20: 3B: Connecting The Video Components
3b: Connecting the video components How to hook up your Video input/output jack to be components connected This section describes how to hook up your The image quality depends on the connecting components to this receiver. Before you begin, jack. Refer to the illustration that follows. refer to “Component to be connected”... -
Page 21: Connecting Components With Hdmi Jacks
AUDIO OUT D-LIGHT FRONT SURROUND CENTER SA-CD/CD/CD-R VIDEO 1 SUB WOOFER SYNC OUT SPEAKERS A HDMI cable (not supplied) We recommend that you use a Sony HDMI cable. B Coaxial digital cord (supplied) C Optical digital cord (not supplied) continued... - Page 22 If you connect a Blu-ray disc Notes on digital audio signals player connection • Be sure to change the factory setting of the • When connecting optical digital cords, insert VIDEO 2 input button on the remote so that the plugs straight in until they click into you can use the button to control your Blu- place.
-
Page 23: Connecting A Tv
Notes Connecting a TV • Connect image display components such as a TV or a projector to the MONITOR OUT jack on the The image from a visual component connected receiver. to this receiver can be displayed on a TV •... -
Page 24: Connecting A Dvd Player
Note Connecting a DVD player/DVD To input multi channel digital audio from the DVD recorder player, set the digital audio output setting on the DVD player. Refer to the operating instructions The following illustration shows how to supplied with the DVD player. connect a DVD player and DVD recorder. -
Page 25: Connecting A Dvd Recorder
Connecting a DVD recorder DVD recorder Audio signals Video signals DIGITAL OPTICAL ANTENNA DVD IN VIDEO 2/BD IN HDMI VIDEO 2/ BD IN COAXIAL SURROUND BACK VIDEO OUT VIDEO IN VIDEO IN VIDEO OUT VIDEO IN SAT IN DVD IN VIDEO 1 IN MONITOR OUT DMPORT... -
Page 26: Connecting A Satellite Tuner
Notes Connecting a satellite tuner/ • When connecting optical digital cords, insert the set-top box plugs straight in until they click into place. • Do not bend or tie optical digital cords. The following illustration shows how to connect a satellite tuner or set-top box. All the digital audio jacks are compatible with It is not necessary to connect all the cables. - Page 27 Connecting components with analog video and audio jacks The following illustration shows how to connect a component which has analog jacks such as a VCR, etc. Audio signals Video signals DIGITAL OPTICAL ANTENNA DVD IN VIDEO 2/BD IN HDMI VIDEO 2/ BD IN COAXIAL SURROUND BACK...
-
Page 28: 3C: Connecting The Lighting Device
3c: Connecting the lighting device Notes Connecting a lighting device • The D-LIGHT SYNC Controller will send the control signal to the lighting device in order to The following illustration shows how to make the lighting device reaction respectively with connect a lighting device. -
Page 29: 4: Connecting The Antennas
4: Connecting the antennas Connect the supplied AM loop antenna and FM wire antenna. FM wire antenna (supplied) AM loop antenna (supplied) DIGITAL OPTICAL ANTENNA DVD IN VIDEO 2/BD IN HDMI VIDEO 2/ BD IN COAXIAL SURROUND BACK VIDEO IN VIDEO IN VIDEO OUT VIDEO IN... -
Page 30: 5: Preparing The Receiver And The Remote
Connecting the AC power cord 5: Preparing the receiver Connect the AC power cord to a wall outlet. and the remote AC power cord Setting the voltage selector If your receiver and sub woofer has a voltage selector on the rear panel, check that the voltage selector is set to the local power supply voltage. - Page 31 Performing initial setup Inserting batteries into the operations remote Before using the receiver for the first time, Insert two R6 (size-AA) batteries in the initialize the receiver by performing the RM-AAU013 (models of area code MX, E51, following procedure. This procedure can also AR only) or RM-AAU015 (models of area be used to return settings you have made to code SP, AU, TH only) remote commander.
-
Page 32: 6: Calibrating The Appropriate Settings Automatically (Auto Calibration)
Notes 6: Calibrating the • The Auto Calibration function does not work when headphones are connected. appropriate settings • If the Muting function is on when we perform Auto Calibration, it will turn off automatically. automatically (AUTO CALIBRATION) MASTER VOLUME Optimizer microphone MULTI CHANNEL DECODING DISPLAY... - Page 33 Measurement starts. Performing Auto Calibration The measurement process will take a few minutes to complete. The table below shows the display when TV INPUT TV ?/1 measurement starts. DMPORT SLEEP AV ?/1 switch Measurement for Display SYSTEM STANDBY VIDEO 1 VIDEO 2 VIDEO 3 Environment noise NOISE.CHK Input...
- Page 34 Error Explanation Remedies Error and warning codes code ERROR 23 Surround back Be sure to connect Error codes speaker is the surround detected but speakers. When an error is detected during Auto surround Calibration, an error code will appear on the speakers are not display cyclically after each measurement connected.
- Page 35 Warning code and solution For details, refer “Front speaker distance” (page 49). Warning Explanation Solution For details, refer “Center speaker distance” code (page 49). WARN. 40 The environment Make sure the For details, refer “Surround left speaker distance” is noisy. environment is (page 49).
-
Page 36: 7: Adjusting The Speaker Levels And Balance (Test Tone)
Press V/v repeatedly to select 7: Adjusting the speaker “T. TONE Y”. The test tone is output from each speaker levels and balance in sequence as follows: Front left t Center t Front right t (TEST TONE) Surround right t Surround back t Surround left t Sub woofer You can adjust the speaker levels and balance while listening to the test tone from your... -
Page 37: Playback
Selected input Components that can [Display] be played back Playback VIDEO 1 VCR, etc., connected to [VIDEO 1] the VIDEO 1 jack Selecting a component VIDEO 2 Blu-ray disc recorder, etc., [VIDEO 2/BD] connected to the VIDEO 2 jack TV INPUT TV ?/1 DMPORT SLEEP... - Page 38 To avoid damaging your speakers Before you turn off the receiver, be sure to turn down the volume level. To listen to the sub woofer Be sure to use the buttons on the sub woofer for this operation. Press POWER. The POWER indicator lights up.
-
Page 39: Listening/Watching A Component
Turn on the Super Audio CD player/CD • The operation is described for a player, then place the disc on the tray. Sony Super Audio CD player. • Refer to the operating Turn on the receiver. instructions supplied with the Super Audio CD player or CD Press SA-CD/CD. -
Page 40: Watching A Dvd
Watching a DVD TV INPUT TV ?/1 MULTI CHANNEL DECODING lamp DMPORT SLEEP AV ?/1 SYSTEM STANDBY VIDEO 1 VIDEO 2 VIDEO 3 SA-CD/CD TUNER A.F.D. MOVIE MUSIC AMP MENU MASTER VOLUME MULTI CHANNEL DECODING AUTO CAL TUNING MODE DISPLAY INPUT MODE D.TUNING INPUT SELECTOR... -
Page 41: Amplifier Operations
To return to the previous display Press B. Amplifier Operations To exit the menu Navigating through Press AMP MENU. menus Note Some parameters and settings may appear dimmed By using the amplifier menus, you can make on the display. This means that they are either various adjustments to customize the receiver. -
Page 42: Overview Of The Menus
Overview of the menus The following options are available in each menu. For details on navigating through menus, see page 41. Menu Parameters Settings Initial [Display] [Display] setting LEVEL (44) Test tone T. TONE Y, T. TONE N T. TONE N [1-LEVEL] [T. - Page 43 Menu Parameters Settings Initial [Display] [Display] setting AUDIO (47) Digital audio input decoding DEC. AUTO, DEC. PCM DEC. AUTO for: [5-AUDIO] priority VIDEO 2, SAT; [DEC. PRI.] DEC. PCM for: Digital broadcast language DUAL M/S, DUAL M, DUAL S, DUAL M selection DUAL M+S [DUAL]...
-
Page 44: Adjusting The Level (Level Menu)
x D. RANGE (Dynamic range compressor) Adjusting the level Lets you compress the dynamic range of the (LEVEL menu) sound track. This may be useful when you want to watch movies at low volumes late at night. Dynamic range compression is possible You can use the LEVEL menu to adjust the with Dolby Digital sources only. -
Page 45: Adjusting The Tone (Tone Menu)
Adjusting the tone Settings for the surround sound (TONE menu) (SUR menu) You can use the TONE menu to adjust the tonal quality (bass/treble level) of the front You can use the SUR menu to select the sound speakers. field you want for your listening pleasure. Select “2-TONE”... - Page 46 x SB ON Using the surround back To decode the surround back signal regardless decoding mode of the 6.1 channel decode flag , Dolby Digital EX is applied when the output channel is 6.1. (SUR BACK DECODING) Input stream Output Surround back By decoding the surround back signal of DVD channel...
-
Page 47: Settings For The Tuner (Tuner Menu)
Settings for the tuner Settings for the audio (TUNER menu) (AUDIO menu) You can use the TUNER menu to set the FM You can use the AUDIO menu to make station receiving mode and to name preset settings for the audio to suit your preference. stations. -
Page 48: Settings For The Video (Video Menu)
x DUAL (Digital broadcast language selection) Settings for the video Lets you select the language you want to listen (VIDEO menu) to during digital broadcast. This feature only functions for Dolby Digital sources. • DUAL M/S (Main/Sub) (Models of area code SP, AU, TH Sound of the main language will be output only) through the front left speaker and sound of... -
Page 49: (Models Of Area Code Sp, Au, Th Only) Settings For The System (System Menu)
x SL DIST. (Surround left speaker distance) Settings for the system Lets you set the distance from your listening (SYSTEM menu) position to the surround left speaker. Surround left speaker distance should be set from a distance equal to the front speaker distance You can use the SYSTEM menu to set the (A) to a distance 4.5 meters closer to your distance of the speakers connected to this... - Page 50 x SUR POS. (Surround speaker position) The receiver lets you to input the speaker position in Lets you specify the location of your surround terms of distance. However, it is not possible to set the center speaker further than the front speakers. speakers for proper implementation of the Also, the center speaker cannot be set more than surround effects in the Cinema Studio EX...
-
Page 51: Calibrating The Appropriate Settings Automatically (A. Cal Menu)
Calibrating the Surround speaker position is designed specifically for implementation of the Cinema Studio EX modes. appropriate settings For other sound fields, speaker position is not so critical. automatically Those sound fields were designed under the premise that the surround speakers would be located behind (A. -
Page 52: Enjoying Surround Sound
Enjoying Surround Sound Enjoying Dolby Digital and DTS Surround sound (AUTO FORMAT DIRECT) The Auto Format Direct (A.F.D.) mode allows you to listen to higher fidelity sound and select the decoding mode for listening to a 2 channel stereo sound as multi channel sound. SA-CD/CD TUNER A.F.D. - Page 53 Types of A.F.D. mode Decoding A.F.D. mode Multi channel Effect mode [Display] audio after decoding (Detecting A.F.D. AUTO (Detecting Performs the sound as it was recorded/ automatically) [A.F.D. AUTO] automatically) encoded without adding any surround effects. However, this receiver will generate a low frequency signal for output to the sub woofer when there is no LFE signals.
-
Page 54: Selecting A Pre-Programmed Sound Field
Notes Selecting a pre- • DTS Neo:6 does not work for DTS 2CH audio, the sound is played as 2 channel. programmed sound field • Dolby Pro Logic IIx decoding does not function for DTS format signals or for signals with a sampling frequency of more than 48 kHz. - Page 55 Sound field Effect [Display] Movie CINEMA STUDIO EX A Reproduces the sound characteristics of the Sony Pictures DCS [C.ST.EX A] Entertainment “Cary Grant Theater” cinema production studio. This is a standard mode, great for watching almost any type of movie.
- Page 56 • This function does not work for signals with a Sony, in cooperation with Sony Pictures sampling frequency of more than 48 kHz. Entertainment, for enjoying the exciting and •...
-
Page 57: Using Only The Front Speakers And Sub Woofers (2Ch Stereo)
Using only the front Resetting sound fields to speakers and sub the initial settings woofers Be sure to use the buttons on the receiver for this operation. (2CH STEREO) In this mode, the receiver outputs the sound from the front left/right speakers and the sub woofers. -
Page 58: Tuner Operations
Automatic tuning Tuner Operations VIDEO 1 VIDEO 2 VIDEO 3 Listening to FM/AM radio SA-CD/CD TUNER You can listen to FM and AM broadcasts A.F.D. MOVIE MUSIC through the built-in tuner. Before operation, AMP MENU make sure you have connected the FM and AM antennas to the receiver (page 29). -
Page 59: Direct Tuning
In case of poor FM stereo Press ENTER. reception You can also use MEMORY/ENTER on If the FM stereo reception is poor and “ST” the receiver. flashes on the display, select monaural audio so that the sound will be less distorted. If you cannot tune in a station Press FM MODE repeatedly until the Make sure you have entered the right... -
Page 60: Presetting Radio Stations
Press MEMORY. Presetting radio stations You can also use MEMORY/ENTER on the receiver. “MEMORY” lights up for a few seconds. You can preset up to 30 FM stations and 30 Perform steps 4 and 5 before AM stations. Then you can easily tune in the “MEMORY”... -
Page 61: Tuning To Preset Stations
Using the controls on the Tuning to preset stations receiver Turn INPUT SELECTOR to select the FM or AM band. VIDEO 1 VIDEO 2 VIDEO 3 Press TUNING MODE repeatedly to select SA-CD/CD TUNER “PRESET T.”. Turn TUNING +/– to select the preset A.F.D. -
Page 62: Other Operations
Press V/v repeatedly to select Other Operations “NAME IN”. Press or b to enter the Switching the audio input parameter. mode The cursor flashes and you can select a character. Follow the procedure given in (INPUT MODE) “To create an index name” below. You can select the audio input mode by setting To create an index name the audio input mode when you connect... -
Page 63: Enjoying The Digital Media Port (Dmport)
Enjoying the DIGITAL MEDIA PORT (DMPORT) (Models of area code SP, AU, TH only) The DIGITAL MEDIA PORT (DMPORT) allows you to enjoy sound from a network system such as a portable audio source or computer. By connecting a DIGITAL MEDIA PORT adapter (not supplied), you can enjoy sound from the connected component on the receiver. -
Page 64: Connecting The Digital Media Port Adapter
You can also view the images on the TV Connecting the DIGITAL MEDIA screen by connecting the video output of the PORT adapter DIGITAL MEDIA PORT adapter to the receiver. You can listen to the sound from the To view the images, proceed to “Watching a component connected through the DIGITAL connected component through DMPORT MEDIA PORT adapter to the DMPORT jack... - Page 65 Press V/v repeatedly to select Listening to a connected the composite video input you component through DMPORT want to assign to DMPORT connection input. Initial setting: –NONE Press DMPORT. The assignable composite video input are You can also use the INPUT SELECTOR VIDEO 1, VIDEO 3, DVD and SAT on the receiver to select “DMPORT”.
-
Page 66: Creating A Party Environment (X-Round)
Adjusting the X-ROUND effect Creating a party You can adjust the speed of each X-ROUND environment effect. (X-ROUND) Press X-ROUND SPEED repeatedly to adjust the speed of selected You can create a party environment by using X-ROUND. X-ROUND to change the sound effect of your Each time you press the button, the display speakers. -
Page 67: Naming Inputs
Naming inputs Changing the display You can enter a name of up to 8 characters for You can check the sound field, etc., by inputs and display it on the receiver’s display. changing the information on the display. This is convenient for labeling the jacks with Be sure to use the button on the receiver for the names of the connected components. -
Page 68: Using The Sleep Timer
Using the Sleep Timer Recording using the receiver You can set the receiver to turn off automatically at a specified time. You can record from a audio/video component using the receiver. For details, refer to the Press SLEEP repeatedly while the operating instructions supplied with your power is on. -
Page 69: Using The Remote
Recording onto a recording Using the Remote media You can record from a video component using Changing button the receiver. See the operating instructions assignments supplied with your recording component. Press one of the input buttons You can change the factory settings of the to select the playback input buttons to suit the components in your component. -
Page 70: Glossary
-/-- Digital audio encoding/decoding technology developed by Dolby Laboratories, Inc. It Sony VCRs are operated with a VTR 2 or VTR 3 consists of front (left/right), center, surround setting which corresponds to 8 mm and VHS (left/right) and subwoofer channels. It is a respectively. - Page 71 x Dolby Pro Logic II x DTS Neo:6 This technology converts 2ch stereo recorded This technology converts 2ch stereo recorded audio into 5.1ch for playback. There is a audio for 6.1ch playback. There are two modes MOVIE mode for movies and MUSIC mode to select according to the playback source or for stereo sources such as music.
-
Page 72: Precautions
On placement Precautions • Place the receiver in a location with adequate ventilation to prevent heat buildup and prolong the life of the receiver. On safety • Do not place the receiver near heat sources, Should any solid object or liquid fall into the or in a place subject to direct sunlight, cabinet, unplug the receiver and have it excessive dust, or mechanical shock. -
Page 73: Troubleshooting
If you have any questions or problems • Check that both the receiver and all concerning your receiver, please consult your components are turned on. nearest Sony dealer. • Check that MASTER VOLUME is not set to “VOL MIN”. • Check that headphone is not connected. - Page 74 There is no sound from one of the front There is no sound from the speakers of speakers. the receiver when you connect the receiver and the playback component • Connect a pair of headphones to the via a HDMI connection. PHONES jack to verify that sound is •...
- Page 75 Video The surround effect cannot be obtained. There is no picture or an unclear • Make sure the sound field function is on picture appears on the TV screen or (press MOVIE or MUSIC). monitor. • Sound fields do not function for signals •...
-
Page 76: Remote Control
(not supplied) system by the message. Refer to the following table to solve the problem. If any problem persists, consult your nearest Sony dealer. If To ground an error message appears while you perform Auto Calibration, see “Error and warning Radio stations cannot be tuned in. -
Page 77: Specifications
THD 1%) 90 W + 90 W If the problem persist 85 W + 85 W Consult your nearest Sony dealer. Note that if Surround mode output (reference) service personnel changes some parts during RMS output repair, these parts may be retained. - Page 78 Video section Inputs Inputs/Outputs Analog Sensitivity: 800 mV/50 kohms Video: 1 Vp-p, 75 ohms Digital (Coaxial) Impedance: 75 ohms COMPONENT VIDEO: Y: 1 Vp-p, 75 ohms : 0.7 Vp-p, 75 ohms Outputs (Analog) : 0.7 Vp-p, 75 ohms AUDIO OUT Voltage: 800 mV/10 kohms 80 MHz HD Pass Through...
- Page 79 • Center speaker (SS-CNP16) Power requirements Speaker system 2-way, 3 unit, magnetically Area code Power requirements shielded SP, TH 230 – 240 V AC, Speaker units 50/60 Hz Woofer: 100 mm, cone type × 2 240 V AC, 50 Hz Tweeter: 25 mm, horn type 127 V AC, 60 Hz...
-
Page 80: Index
24 onto a CD-R 68 directly 59 playback 40 onto a recording media to preset stations 61 DVD recorder connecting 25 connecting 23 Error messages 76 connecting 27 Video game connecting 27 X-ROUND 66 Sony Corporation Printed in Malaysia...