Epson Stylus Photo RX600 Basic Operation Gude page 67

1. Press the Setup button.
2. Select
3. Confirm the messages on the LCD panel, then press the OK button
to start Head cleaning.
4. When
from the LCD panel, perform the nozzle check to confirm that the
head is clean and to reset the cleaning cycle. See "Checking the Print
Head Nozzles" on page 65.
Caution:
c
Never turn off this product while Head cleaning in progress. Doing
so may damage this product.
Note:
❏
If the print quality has not improved after repeating this procedure
four or five times, turn this product off and leave it alone overnight.
Then, perform the nozzle check again and repeat head cleaning if
necessary.
❏
If the print quality still has not improved, one or both of your ink
cartridges may be old or damaged and may need to be replaced. To
replace an ink cartridge, see "Replacing an Ink Cartridge" on page 61.
❏
To maintain good print quality, we recommend printing a few pages
at least once every month.
.
1. Select
2. Press the OK button.
Maintenance and Transporting
.
disappears
67