Energy Star Compliance; Important Safety Instructions - Epson 1000 ICS Basics Manual

E
NERGY
As an ENERGY STAR Partner, EPSON has determined that this product
meets the ENERGY STAR guidelines for energy efficiency. The EPA
ENERGY STAR office equipment program is a voluntary partnership with the
computer and office equipment industry to promote the introduction of
energy-efficient personal computers, monitors, printers, fax machines, and
copiers in an effort to reduce air pollution caused by power generation.

Important Safety Instructions

Before using your EPSON 1000 ICS, read the following safety instructions to make sure you use the
EPSON 1000 ICS safely and effectively:
Be sure to follow all warnings and instructions marked on the EPSON 1000 ICS.
Use only the type of power source indicated on the EPSON 1000 ICS's label.
Connect all equipment to properly grounded power outlets. Avoid using outlets on the same
circuit as air control systems or other high-load devices that regularly switch on and off.
Place the EPSON 1000 ICS near a wall outlet where the plug can be easily unplugged.
Placez l'imprimante près d'une prise de contacte où la fiche peut être débranchée facilement.
Do not let the power cord become damaged or frayed.
If you use an extension cord with the EPSON 1000 ICS, make sure the total ampere rating of the
devices plugged into the extension cord does not exceed the cord's ampere rating. Also, make sure
the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet's
ampere rating.
Avoid electrical outlets controlled by wall switches or automatic timers.
Keep your EPSON 1000 ICS and computer system away from potential sources of
electromagnetic interference, such as loudspeakers or cordless telephone base units.
Avoid locations that are subject to rapid changes in heat or humidity, shocks or vibrations, or dust.
Leave enough room around the EPSON 1000 ICS for sufficient ventilation.
Do not place the EPSON 1000 ICS near a radiator or heating vent or in direct sunlight.
Place the EPSON 1000 ICS on a flat, stable surface that extends beyond the EPSON 1000 ICS
base in all directions. The EPSON 1000 ICS will not operate properly if it is tilted or at an angle.
Leave enough space in front of the EPSON 1000 ICS for the paper to be fully ejected.
Turn off and unplug the EPSON 1000 ICS before cleaning. Clean with a damp cloth only. Do
not spill liquid on the EPSON 1000 ICS.
52

ENERGY STAR Compliance

S Compliance
TAR