Fujitsu ETERNUS VSS Hardware Provider 2.1 User Manual page 115

Chapter 9 Messages
9.2 Command Messages
■
STXV0604 WARNING Failed to access device.
[Meaning]
Failed to access device.
[Action]
Use [Disk Management] to check that the disk is in normal status.
Start [Disk Management] according to the following procedure:
1
Click the [Start] – [Control Panel], then double-click [Administrative Tools], then
[Computer Management] to start.
2
Click [Computer Management (local)] – [Storage] – [Disk Management].
■
STXV0605 ERROR Internal inconsistency.
[Meaning]
Internal inconsistency. The process is canceled.
[Action]
Refer to "10.2 How to Obtain Error Information" (page
before contacting a Fujitsu field engineer (FE).
■
STXV0701 ERROR Invalid number of parameters.
[Meaning]
The specified number of parameters is invalid. The process is canceled.
[Action]
Correct the parameter, and try again.
■
STXV0702 ERROR Invalid parameter. Parameter = "parameter"
[Meaning]
The specified "parameter" is invalid. The process is canceled.
[Action]
Correct the parameter, and try again.
Check the mount point if it has been specified.
115
ETERNUS VSS Hardware Provider 2.1 User's Guide
Copyright 2012 FUJITSU LIMITED
131), and prepare the required information
P3AM-4582-03ENZ0