Available Hoops - Brother BES Monogramming Suite Instruction Manual

2 On the Home Tab, click the down arrow under the Hoop tool.
3 From the menu that appears, click on Fit Hoop.
The current design will automatically be resized to fill the
current hoop.

Available Hoops

Pacesetter Monogramming comes pre-loaded with a number of
different hoops. The hoop sizes available for each file type are
listed in the following table.
Format Available Sizes (mm)
DST 130 × 180, 300 × 300
EXP 130 × 180, 300 × 300
HUS 100 × 100, 80 × 80
JEF 240×200, 200 × 200, 140 × 200, 126 × 110, 50 × 50
PCS 120 × 115, 80 × 80
PES 300 × 200, 180 × 300, 160 × 260, 200 × 200, 130 × 180,
100 × 180, 130 × 60, 130 × 50, 100 × 100, 90 × 80,
60 × 40, 60 × 20
PES Multi- 360 × 200, 300 × 200, 300 × 100, 160 × 160, 130 × 130,
needle 100 × 100
SEW 122 × 88, 80 × 70, 50 × 50
SHV 150 × 240, 100 × 100, 40 × 40
VP3 & VIP 360 × 350, 360 × 200, 150 × 240, 140 × 225, 170×100,
120 × 120, 100 × 100
XXX 130 × 240, 114 × 114, 112 × 80, 55 × 55
Important: The maximum size of the design that you can save,
in any given file format, is limited by the largest hoop available
in that format.
For example, if you are saving as PES MultiNeedle, the largest
design you will be able to save is 360mm × 200mm.
If you try to save a file that is larger than the largest hoop, you
will be given an error message.
Learning about the Workspace 29