Table of Contents
Advertisement
Modem
Ring Resume Function
The computer automatically resumes from sleep
You will need software to keep the computer in idle state waiting for a phone call, and if you prefer, to turn the computer to
*2
sleep
again afterward. For further information, refer to the instruction manual of the software application.
To enable this function
1
Click
(Start) - [All Programs] - [Windows Fax and Scan].
2
Click [Tools] - [Fax Settings].
A standard user needs to enter an administrator password.
Check whether the modem you are using is displayed in Device name. If not, click [Select fax device] and select
the correct modem.
3
Add a check mark for [Allow the device to receive fax calls] and click [OK].
4
Click
(Start) - [Computer] - [System properties] - [Device Manager].
A standard user needs to enter an administrator password.
5
Double-click [Modems], and then double-click the internal modem.
6
Click [Power Management] and add a check mark for [Allow this device to wake the com-
puter], and then click [OK].
1
Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] -
[Device Manager] - [Modems], and double-click the internal modem.
2
Click [Power Management], add the check mark for [Allow this device to bring the com-
puter out of standby.], and click [OK].
To set the time to return the computer to sleep
The computer will enter sleep
uncompleted communication if you select [Never], but the computer does not return to sleep
*2
when the telephone connected to the modem rings.
*2
after the set time even when the communication is not completed. You can avoid such
*2
*2
after resuming by a phone call.
86
Advertisement
Table of Contents
