Table of Contents
Advertisement
Using Display by Client mode
1.
Connect the Wi-Fi dongle to your LED projector to launch the
Media Center.
NOTE: If the Media Center does not automatically launch, press
then select EZLINK-WIFI
Select Display by Client mode.
2.
3.
Press
Wi-Fi hotspots then press
would like to connect to.
4.
Press
Refer to the control panel grid when navigating the keyboard to
input the Wi-Fi hotspot's password.
Press OK to start the Wi-Fi connection between the Wi-Fi
5.
hotspot and your LED projector.
6.
Repeat the same steps under Using Display by AP mode to
connect input devices to the LED projector.
5
DRAFT 2 12/17/12
DRAFT 2 12/17/12
to scroll up or
to launch the onscreen display menu's keyboard.
to scroll down the list of available
to select the Wi-Fi hotspot you
LED projector E-Manual
Advertisement
Table of Contents
