Plug & Play (Initial Setup) - Samsung 440 User Manual

Getting Started
When the TV is initially powered on, basic settings proceed automatically.
Oonnecting the power cord and an antenna or cable connection.
The PDP device may interfere with an amateur radio or AM radio.
o o
L_l PowerInput
VHF/UHF Antenna
o_
When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic settings. To turn on
the TV, Press the POWER (b button. Plug & Play is available only when the input source is set to T_.
Plug & Play is available only when the Source is set to TV.
To return to the previous step, in the Plug & Play sequence, press the red button on your remote.
Selecting the OSD
Language
Selecting Store Demo
or Home Use
Selecting an amenna
Press the _1or !_ button, and then press the A or T button to
selecl a language. Press ENTERI_%_ when done.
Press the _ or !_ button, then press the ENTER IZ_ button.
Select the Home Use mode. Store Demo mode is for retail
environments.
• To return the unit's settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you
see the volume OSD, press and hold MENU for 5 sec.
POWER
Press the A or _r button, then press the ENTER I_ button. Select Air, Cable or Auto.
Selecting and
memonz_ng channels
Sett ng the
Clock Mode
V_ewthe
HD Connection Guide.
The channel search wiii start automatically. This can take up to 30 minutes.
For more information, refer to Channel _ Auto Program in the e-Manual.
Press the ENTERE_ button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
• Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.
• Manual: Allows you to manually set the current date and time (p. 18),
The connection method for the best HD screen quality is displayed.
Enjoy your TV. Press the ENTER I_ button.
if You Want to Reset This Feature...
(_ MENU rrrl -_ Setup -_ Plug & Play -_ ENTERI__
NOTE
• To change the TV's setting from Store Demo to Home Use when not in Plug & Play, press the volume button on the T_.
When you see the volume in the OSD, press and hold MENU for 5 sec.
English