D-Link DSL-G604T User Manual page 58

with the access point. This menu is also be used to enable and configure use of multiple SSIDs. To use
more than one SSID, WEP and WPA security must first be disabled (see below).
Configure Wireless Access Control
To create a list of MAC addresses that are banned or allowed association with the wireless access
point:
1. Click in the Enable Access List option box to select it.
2. Select the action to perform on the MAC address to be specified. Choose to Allow or Deny
association.
3. Type in the MAC Address in the entry field provided.
4. Click the Add button to add the MAC address to the list. The MAC address will appear listed
in the table below.
5. After compiling the list of MAC addresses as desired, click the Apply button to enforce access
control for the MAC addresses in the list.
To remove any MAC address from the list, click the radio button in the left column of the list for the
MAC address to be removed and click the Apply button. To view a list of stations currently associated
with the access point, click the Associated Stations radio button.
DSL-G604T 54Mbps Wireless ADSL2/2+ Modem/Router Manual
Figure 5- 14. Wireless Management
58