Table of Contents
Advertisement
6. INSTALLATION
Before connecting, make sure that the mains voltage is exactly
within voltage range shown on the label located on the rear cover.
If you are uncertain of the type of line voltage where this monitor
will be used, consult your local power company or the dealer.
a. Make sure the monitor and the computer are turned off before
installation.
b. Plug the power cord into the connector on the rear side of the
monitor.
c. Plug the other end of the power cord into the wall power outlet
d. Plug the free end of the signal cable into the drive connector of
the video adapter port of the computer. Securely tighten the two
cable screws on the cable.
When power and signal cable installations completed, this
monitor is ready for operation.
CAUTION:
1.
When the monitor is turned on continuously for a long
period. the phosphors of the CRT face plate may "bum"
leaving a permanent image on the screen.
preserve CRT life, be sure to turn off the monitor or decrease
the displayed intensity when not in use.
2.
Long time operation. using out of range signal may cause
damage of the monitor.
monitor.
Please observe specification of the
In order to
Advertisement
Table of Contents
