HP Rx5915 - iPAQ Travel Companion Product Information Manual page 23

Step 1: Charge the battery
CAUTION
are properly aligned before connecting.
It takes approximately 2 to 4 hours to fully charge the battery the first time. Subsequent charges may
take longer.
1. Insert the USB end of the mini-USB cable into the port on the AC adapter.
2. Install the appropriate head onto the AC adapter.
3. Connect the AC adapter to an electrical outlet.
4. Connect the mini-USB cable to the charging/communications port on the Travel Companion. The
cable connector only fits one way, so do not force it. If the connector does not insert easily, turn it
over.
NOTE
the Reset button for at least two seconds, or attach an AC adapter to turn on the device.
Step 2: Insert the Getting Started CD into the CD drive of a personal computer
Use the Getting Started CD to complete the setup of the Travel Companion and to synchronize the
Travel Companion with a personal computer.
The HP Install Wizard automatically opens, and the application starts to run.
NOTE
problems installing the applications from the Getting Started CD. An administrator needs to install
the applications.
Step 3: Follow the personal computer on-screen instructions
The HP Install Wizard installs:
●
Microsoft Outlook 2002
●
Microsoft ActiveSync
●
WorldMate Active Sync Plug-in
●
Additional software applications
Step 4: Synchronize your HP iPAQ with your personal computer
Synchronization
Microsoft ActiveSync software, located on the Getting Started CD, allows your HP iPAQ and your
personal computer to communicate with each other.
For synchronization to work properly, install Microsoft ActiveSync on your personal computer before
connecting your HP iPAQ to your computer.
To avoid damaging the Travel Companion or the AC adapter, be sure all connectors
Whenever a replacement battery is inserted into the Travel Companion, press and hold
Do you have administrative rights on your personal computer? If not, you may have
17