Page 1
LCD olo r Television Télévision Couleur LCD LCD-Farb-TV-Gerät I n str u cti ons f o r u se Televisione a Colori LCD Notice d'utilisation L26A01 Bedienungsanleitung Istruzioni per l'uso...
DON’Ts Safety Precautions DON’T continue to operate the equipment if you Please read the following recommended safety pre- are in any doubt about it working normally, or if it cautions carefully for your safety. is damaged in any way switch off, withdraw the IMPORTANT SAFETY mains plug and consult your dealer.
1.Power Source specifications as the original one. Unauthorized sub- stitutions may result in fire, electrical shock, or other The TV set should be operated only from a 220-240 V hazards. AC, 50 Hz outlet. Ensure that you select the correct 9.
Page 6
14. Connection to a television distribution system (Cable TV etc.) from tuner: Apparatus connected to the protective earthing of the building installation through the mains connection or through other apparatus with a connection to pro- tective earthing - and to a television distribution sys- tem using coaxial cable, may in some circumstances create a fire hazard.
Features Accessories • Remote controlled 26” colour LCD TV. • 100 programmes from VHF, UHF bands or cable channels can be preset. • It can tune cable channels. • Controlling the TV is very easy by its menu driven UK Plug system.
LCD TV Front View SOURCE SELECT MENU BUTTON PROGRAMME UP/DOWN FRONT VIEW VOLUME UP/DOWN STANDBY BUTTON Built in Speakers Standby LED Fixed Table Top Stand IR Receiver Rear View and Peripheral Connections S-VHS Input (S-Video) Power On/Off Switch Component Audio Inputs s Video Input (FAV) HDMI Input 2 (HDMI 2) SCART 1 (AV-1)
SAT T = Select SAT = Mono/Stereo - Dual A-B = No function = PIP, PAP On-Off / PAT = Picture mode 0 - 9 = Digit buttons ** These buttons can control most Hitachi DVD Players and Recorders. - 8 -...
Note: Remove the battery from remote control hand- Preparation set when it is not to be used for a long period. Other- For ventilation, leave a space of at least 10 cm free all wise it can be damaged due to any leakage of bat- around the set.
Switching The TV ON/OFF Initial Settings When the TV is turned on for the first time, Auto To switch the TV on: Programme menu will be displayed on the screen Your TV will switch on in two steps: Because this is the first time the TV is used, there are no 1- Connect the power cord to the system.
AV Mode Menu System Press the AV button at the control panel on the the TV Picture Menu to switch your TV to AV modes. Operation with Remote Control The remote control of your TV is designed to control all the functions of the model you selected. The func- tions will be described in accordance with the menu PICTURE system of your TV.
3D Comb to change the level of the balance.Balance level can be adjusted between -32 and +32. 3D Comb is used to improve colour transitions and Headphone colour quality of pictures. By pressing button, select Headphone. Press By pressing button, select 3D Comb. Press button to enter hedphone menu.
Dynamic Bass is not available if Subwoofer is set to PIP Picture Press button to enter PIP Picture submenu. Ad- Set Subwoofer to On when you connect an external justments of Contrast, Brightness, Sharpness, Colour, subwoofer to the set. Reset and Store items in this part are identical with Picture menu in the analogue TV menu System.
justments of Contrast, Brightness, Sharpness, Colour, Blue Background Reset and Store items in this part are identical with You can set the TV to automatically change to a blue Picture menu in the Menu System. Refer to Picture screen if the signal is weak or absent, or when there menu explanations in the previous parts.
Program Table APS (Auto Programming System) By pressing button, select Program Table. When you press the BLUE button for APS, Auto Pro- gramming System Menu will appear on the screen. Press to display Program Table. Auto Program Program Table P11 S 18 P01 BBC 1 P02 C 04 P12 S 29...
Band Colour System By pressing select Colour System. By press- Band can be selected either C or S by press button. button, you can change the colour system to PAL, SECAM, PAL 60, NTSC 4,43, NTSC 3,58 or Channel AUTO. Channel can be changed by button or Digit Buttons.
H (Horizontal) Position PC Mode This item shifts the image horizontally to right hand Installation side or left hand side of the screen. • Power off both Computer and Display before making • Select H Position item by using button. any connections.
Zoom Modes Other Features TV Status Zoom mode can be changed by pressing the button. You can change the screen size according to Programme Number, Programme Name, the picture aspect ratio. Select the optimum one from Sound Indicator and Zoom Mode are displayed the following ZOOM modes.
Teletext Teletext system transmits informartion such as news, sports and weather on your TV. Note that if the signal becomes insufficient, some text errors may occur or the teletext mode may be quitted.Teletext function buttons are listed below: Use to view a normal picture (4:3 aspect ratio) as this is its original shape.
Playback NTSC Connect Peripheral Equipment • Connect NTSC VCR player to a SCART socket of High Definition the TV. Your LCD Television is capable of displaying High • Then, select the related source from the SOURCE menu. Definition pictures from devices such as a High Defi- Source selection for VCR recording.
Tips Care Of The Screen Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer. Poor Picture Have you selected the correct TV system? Is your TV set or house aerial located too close to non-earthed audio equipment or neon lights, etc.? Mountains or high buildings can cause double pic-...
Specifications DISPLAY Size/Diagonal 26" (16:9 Display) Viewable screen size/Diagonal 57.7 x 32.5 (cm) / 66.22 (cm) VIDEO STANDARDS Video PAL/NTSC/SECAM TV Tuner PAL/SECAM/B/G D/K K' I/I' L/L' VHF (BAND I/III) UHF (BAND U) HYPERBAND CABLE TV (S1-S20 / S21-S41) 100 PRESET CHANNELS Formats 4:3, 16:9, 14:9, Panoramic, Default Zoom, Auto Wide AUDIO...
Page 25
Specifications OUTPUT CONNECTIONS Line Out Audio Phono L/R Subwoofer 1 x Phono (Mono) Audio Speaker Output 2x8 W RMS Synchronization Sync on green, composite sync with automatic detection separate H and V sync. On/Off, Standby, Vol+, Vol-, Prog +, Prog -, Menu, TV/AV. Operator Control Keys OPERATING CONDITIONS Temperature...
Specifications Signal Input PC RGB Terminal (D-sub 15-pin connector) Input signal G or sync on green • When different kinds of input signals are simul- No connection taneously input to the monitor via a graphics No connection board or the like, the monitor will automatically select the signals in the following priority order: R.GND G.GND...
Appendix A: PC Input Typical Display Modes The display has a maximum resolution of 1360 x 768, frequency range of 56-75 Hz. The following table is an illustration of some of the typical video display modes. Resolution Frequency Mode Horizontal Vertical Hor.(kHz) Ver.(Hz) 31,5 37,9 37,5...
Appendix C: Main and PIP-PAP Picture Combinations M ain and PIP, PAP picture combinations AV-1 AV-1 AV-2 AV-2 AV-3 AV-3 F AV S-VHS YPbPr HDM I 1 HDM I 2 MAIN TUNER CVBS CVBS CVBS SVH S CVBS AV4-S PIP,PAP AV-4 AV-5 TUNER...
12 months of the date of purchase provided that: i) The product has been installed and used only in accordance with the instructions supplied with the product ii) The product has not been repaired, maintained, or modified by any person other than an Hitachi authorised engineer...
• It is recommended that a scart lead should be fitted between your TV and VCR to enhance your picture and sound quality. Scart leads are essential if you have a stereo TV and VCR and wish to obtain stereo sound from your equipment. These leads can be purchased from your Hitachi dealer or any good High Street electrical retailer.
Page 32
...or through a satellite decoder... TFT-LCD TV RF Lead from Satellite to TV • Scart Lead to Aerial AV-1 on TV. ANT.IN RF Lead to Aerial Satellite LNB lead ...or through a VCR and satellite decoder. TFT-LCD TV RF Lead from •...
Page 33
connect the TV plug to the mains socket UK plug European plug Power Cord Power on/off Input button ...and switch on insert plug... Plug the mains lead into the TV insert plug... switch your TV on by pressing the On/Off button TV/AV MENU P/CH...
important note before starting Auto Setup If you have a Video Cassette Recorder or a Satellite receiver connected to your TV please ensure that they are switched on before automatic tuning begins. In the case of a VCR, insert a pre-recorded tape and begin playback of your equipment. These measures ensure that all your external equipment is tuned in during the Auto Setup procedure.