Table of Contents
Advertisement
Use the
Config Import/Export
configuration settings.
CAUTION If importing a 1.1 baseline configuration onto the 2.0 baseline, the
!
CAUTION Motorola discourages importing a 1.0 baseline configuration file to a
!
To create an importable/exportable access point configuration file:
1. Select
System Configuration
screen to configure an import or export operation for access point
802.1x EAP Radius shared secret password will remain "symbol,"
instead of "motorola" (as now required with the 2.0 baseline).
If the shared secret password is not changed to "motorola" there will
be a shared secret mis-match resulting in MU authentication failures.
This password cannot be set using the access point Web UI, and must
be changed using the CLI. For information on changing the shared
secret password using the access point CLI, see
AP51xx>admin(network.wireless.security)> create on page
1.1 version access point. Similarly, a 1.1 baseline configuration file
should not be imported to a 1.0 version access point. Importing
configuration files between different version access point's results in
broken configurations, since new features added to the 1.1 version
access point cannot be supported in a 1.0 version access point.
- >
Config Import/Export
System Configuration
8-82.
from the access point menu tree.
4-45
Advertisement
Table of Contents
