Hitachi PDV314 Instruction Manual page 22

When playing CD
1. Press PLAYMODE until the screen shows:
2. Use the number buttons on the remote to enter the track number , the number you entered appears in the
box. The screen shows:
3. The cursor jumps to the next spot in the program list section. Make sure the box is highlighted and enter
your next track.
4. Continue adding tracks until your program is complete. You can play your program by highlighting START
and press OK.
5. To remove program playback, press the
Note:
If the tracks you want to program are more than 10, you can highlight NEXT and press OK to go to the next
page.
PLAY/PAUSE
OK
Stop
Skip Next
Skip Previous
Reverse Display
Menu
Direction keys
( Up / Down / Left
Set-up
BASIC OPERATION
STOP button twice during the program play.
– Press PLAY / PAUSE button to start playing the disc.
– Press the PLAY / PAUSE button to pause the playback.
– To resume playback at the position where the disc was paused,
press the PLAY / PAUSE button again.
– Confirm selections on a menu screen.
– Press
– Stop playing a disc.
– Press
– Press
– Press this button to reverse the screen display up side down.
– Display the root menu that is stored on the DVD disc.
– In menu mode, use these as cursor buttons to select highlighted
items.
/ Right )
– Display the general, audio, video step menu for the player.
STOP button to stand-by mode of the unit.
to skip to next track.
to skip to the previous track.
- 20 -