Table of Contents
Advertisement
42 inch
4. Fasten the wall-mount unit securely to the wall.
G
Clamp to two or more of the long slotted holes in
the upper and lower parts of each wall-mounting
metal in a well-balanced manner.
cutout
Use the washers provided as necessary.
Mounting the TV-mount metals on the plasma TV
1. Remove the stand.
x
Place a protective sheet cover on the top of a
table and place the plasma TV on the cover with
the back side upward.
➁
Remove the 4 EMI ground screws.
(for CL32-PD2100 only.)
➂
Remove the 4 or 5 (CL37-PD2100) screws
fastening the stand and remove the stand in the
direction indicated by the arrow
Remove the 4 screws
Remove the screws
(CL37-PD2100)
Stand
Mount on a firm,
solid surface.
Wall-mount metal (top)
Wall-mount metal (bottom)
mark.
Remove the 4 EMI ground
screws.(CL32-PD2100)
Plasma TV
Table
Protective sheet cover
5. Dressing the cables
G
When passing the plasma TV power cord and
signal cables behind the plasma TV, use wire
clamps, etc., to prevent cable damage.
Wire clamps
2. Installing the TV-mount metals
CL32-PD2100
I
Fasten the two TV-mount metals to the back of the
plasma TV with 4 M6
4 M6 x 18 screws
– 6 –
18 screws.
x
TV-mount metal
The 3rd TV-mount
metal hole
The 4th TV-mount
metal hole
Advertisement
Table of Contents
