Listening To The Tuner - Fujitsu ECLIPSE CD8443 Owner's Manual

Basic operation
[FM AM] button

Listening to the tuner

1
Press the [FM AM] button.
This will turn the tuner on.
Press the [FM AM] button to switch to the desired FM or
2
AM bands.
For example, radio bands will switch from FM1 ➔ FM2 ➔ FM3
➔ AM1 with each press of the button. (Depends on memory
function setting, described on page 63.)
Turn the [SEL] button to the left or right to tune to a
3
station.
Turn to the right: Tunes to higher frequencies.
Turn to the left:
Press the [SEEK /FAST ] button to start the automatic
4
station search.
[SEEK ] button: Starts searching toward higher frequencies.
[FAST ] button: Starts searching toward lower frequencies.
If stations have been stored in memory, pressing a button
from [1] to [6] will directly select a station. (Refer to the section
ATTENTION
"Manually setting stations into memory" on page 58)
Buttons [1] to [6]
Tunes to lower frequencies.
22
[SEEK ] button
[SEL]
button
[FAST ] button