Locations Of The Surface Radiant Elements; Using The Touch Control - Electrolux 36 Use And Care Manual

10
Setting Surface Controls

LOCATIONS OF THE SURFACE RADIANT ELEMENTS

med med med med
POWER lock warm ON OFF size ON OFF ON OFF size ON OFF timer
hot surface hot surface hot surface hot surface
Fig. 1 - 30" cooktop
med med med med med
warm size size size timer
POWER lock ON OFF ON OFF ON OFF ON OFF ON OFF
hot surface hot surface hot surface hot surface hot surface
Fig. 2 - 36" cooktop

USING THE TOUCH CONTROL

Fig. 3
Your cooktop is equipped with radiant surface burners with different wattage
ratings. The ability to heat food quicker and in larger volumes increases as the
element wattage increases.
The radiant surface elements are located on the 30" cooktop as follows:
- 2 single radiant elements located at the right and left rear positions;
- 1 dual radiant element located at the right front position;
- 1 triple radiant element located at the left front position;
The radiant surface elements are located on the 36" cooktop as follows:
- 2 single radiant elements located at the right and left rear positions;
- 2 dual radiant elements located at the right and center front positions;
- 1 triple radiant element located at the left front position;
The recommended way to use the touch pads on the cooktop is shown
in Fig. 3. Be sure that your finger is placed in the center of the touch pad
as shown. If the finger is not placed on the center of a pad, the cooktop
may not respond to the selection made.
Lightly contact the pad with the flat part of your entire fingertip. Do not
just use the narrow end of your fingertip.