Canon VB150 User Manual page 13

Pictures Search CGI
The pictures search CGI includes the "enum" command to generate a list of recorded pictures that
satisfy the search criteria, the "desc" command to generate the video data display page, and the
"data" command to retrieve the video data.
enum Command
The "enum" command is used to generate a list display page for the search page and to
generate a page for SnapAnimator. The items shown in the recorded picture list generated by
the "enum" command are displayed in order of the time they were recorded.
■enum Command Parameters
Parameter Name
type
server
target
locale
skip/limit
tn
cn
ts
te
* This is a function that corresponds to address replacement using <_I_P_A_D_D_R_>.
However, you cannot specify <_I_P_A_D_D_R_> itself.
List format. Specify "html" to specify a list display page, or "anim" to specify a page
for SnapAnimator. If this parameter is omitted or an undefined value is specified,
"html" is used.
Specifies the HTTP server and the IP address of the HTTP server. If this parameter
is omitted, the IP address of the client side network interface is used*.
Target frame name for list display. Mandatory when a multi-frame configuration is
used to construct the picture search page.
Language used to display the desc command attribute information. Specify "english" for
English-language display and "japanese" for Japanese-language display. The default
value is "english". When an undefined value is specified, the default value is used.
Specifies the range for the search results. Specify an integer of 0 or more for either.
Of the list of recorded pictures that satisfy the search criteria, the list displayed
excludes the number of items specified by the skip parameter from the beginning of
the list and includes items up to the limit imposed by the limit parameter. If these
parameters are omitted or erroneous values are specified, skip is set to 0 and limit to
100. If limit is set to 0, no limit is applied.
Specifies the trigger that governs the main cause of picture recording. A setting of i0
restricts any external device input, and i1 and i2 restrict external device input to
inputs 1 and 2. A setting of s0 restricts any schedule setting, and s1, s2, s3 and s4
restrict schedule setting to settings 1,2,3, and 4. m is motion detection. If this
parameter is omitted, or an undefined value is specified, the trigger is unrestricted.
Camera number used for recording. Specify a value from 1 to 4 as the camera
number. If this parameter is omitted or an undefined value is specified, the camera
number is unrestricted.
Start time for the recording period. Specify a setting using the "yyyymmddHHMMSS"
format (yyyy: year; mm: month; dd: day; HH: hour; MM: minute; SS: second). If this
parameter is omitted or an erroneous value is specified, the start time for the
recording period is unrestricted.
A part of the mm, dd, HH, MM, SS parameter can be omitted. The default settings
are 01 for mm and dd, and 00 for HH, MM and SS.
End time for the recording period. The specification format and the handling of
omitted or erroneous parameters is the same as for ts. A part of the mm, dd, HH,
MM, SS parameter can be omitted. The default settings are 12 for mm, 31 for dd, 23
for HH, and 59 for MM and SS.
Viewing and Distributing Recorded Pictures
Details
10