Canon VB150 User Manual page 21

Creating wvh files
This section describes how to create the wvh file required for launching the Viewer for PC application.
Use a text editor or similar program to create a new text file and type the following type of
1
code in the file:
(Example)
● The first line gives the IP address (or host name) of the VB150 and the TCP port
number used for the video transmission service.
The default setting is 65310 (→ VB150 User's Manual P.56). The default setting will be
used if no particular value is specified.
● The second line gives the IP address (or host name) of the VB150 and the TCP port
number used for the camera control. The default setting is 65311 (→ VB150 User's
Manual P.56). The default setting will be used if no particular value is specified.
● The third line gives the setting for the Viewer for PC to use HTTP protocol. After
"wvhttp:", type in the IP address of the VB150 and "80" as the HTTP port number. As a
result of this, you will be able to view video images from the VB150 through firewalls.
* Type in the actual IP address (or host name) set for the VB150 .
2 After you save the text file and quit the text editor program, create a wvh file by changing
the file name and extension. Be sure to add the ".wvh" extension, as in "WebView.wvh".
File names can contain up to 8 characters. (eg. WebView)
e
Viewer for PC supports WebView Livescope protocol and HTTP protocol.
● WebView Livescope protocol: Cannot be viewed through firewalls. This
Tip
protocol is primarily for clients who are connected directly to the Internet.
● HTTP protocol: In general, this protocol is used with Web browsers. By
using this protocol, clients inside firewalls can view videos by penetrating
firewalls. The Viewer for Java also uses this protocol.
192.168.100.1 65310
192.168.100.1 65311
wvhttp:192.168.100.1 80
18