(4)
For the FAX355MC/FAX375MC/FAX-525DT/FAX-525MC: To take out the main PCB or
the power supply PCB in Section 1.18, unhook the battery harness core and cutter HP
sensor harness core from bosses "C" and "D," respectively, at this stage.
Boss "C"
(Unhook the power supply
harness core from here.)
Motor harness
Boss "D"
(Unhook the cutter HP sensor
harness core from here.)
Power supply harness
(Rear)
Relay "F" Rib "E"
Solenoid
harness
IV – 7
Cutter HP sensor
harness
Resistors
Recording
PE sensor actuator
head harness
Main PCB
CIS harness
Electrolytic
capacitor