Silvercrest DVT-480 User Manual page 54

DVD player
does not start
playback.
No Sound. No
picture.
No picture on
connected TV
set.
Distorted / cut
image.
54
• Check whether the ON/OFF switch (21) is
in the ON position.
• Insert the disc with the label facing up.
• Clean the disc.
• The regional code of the DVD player does
not correspond with the inserted DVD.
• The parental settings prevent the playback
of the inserted disc. Disable the parental
function.
• Condensation in the unit. Turn the DVD
player on and wait until the moisture has
evaporated.
• Check the power supply.
• Check the volume setting.
• Ensure that MUTE (32) is not activated.
• Ensure that the A/V cable between DVD
player and external equipment is properly
connected and that the A/V cable is not
damaged.
• Ensure that the cable of the active
antenna and the DVB-T antenna input (2)
are not damaged.
• Ensure that the display is not switched off.
• Press ADJUST (15) on the unit or
ADJUST (30) on the remote control to
turn the display on.
• Check whether the DVD player and the
TV set are properly connected.
• Check the TV settings.
• Check the display format in the image
settings.
• Press ADJUST (30) to access the image
setting menu.