1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Wireless Access Point
  5. DWL-7100AP
  6. Product manual

D-Link DWL-7100AP - Air Xpert - Wireless Access Point Product Manual

Airpremier wireless 108ag access point
Hide thumbs Also See for DWL-7100AP - Air Xpert - Wireless Access Point:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Manual

Advertisement

Table of Contents
loading

Related Manuals for D-Link DWL-7100AP - Air Xpert - Wireless Access Point

Summary of Contents for D-Link DWL-7100AP - Air Xpert - Wireless Access Point

  • Page 2: Table Of Contents

    Wireless Access Settings ......34 Access Point Mode ........14 WLAN Partition ..........35 Access Point (WEP) ........16 Grouping ............36 Access Point (WPA-EAP/WPA2-EAP) ..17 DHCP Server ........... 37 Access Point (WPA-PSK/WPA2-PSK) ..18 D-Link DWL-7100AP User Manual...
  • Page 3 Configuration Files ........... 71 Discovering Devices ........52 Firmware ............72 Device Configuration ........53 System Settings ..........73 General ............54 Setup Wizard ........... 74 Wireless Settings ..........56 Refresh ............78 Security ............58 About ............... 78 D-Link DWL-7100AP User Manual...
  • Page 4 Checking the IP Address in Windows XP ..... 79 ® Assigning a Static IP Address in XP/2000 ..... 80 Troubleshooting ............84 Technical Specifications ........... 87 Contacting Technical Support ........89 Warranty ..............90 Registration ..............96 D-Link DWL-7100AP User Manual...

  • Page 5: Product Overview

    Product Overview Package Contents • D-Link DWL-7100AP Access Point • Power Supply • Manual and Software on CD • CAT5 Ethernet Cable • Quick Installation Guide Note: Using a power supply with a different voltage than the one included with the DWL-7100AP will cause damage and void the warranty for this product.

  • Page 6: Introduction

    Access Point functionality for 2.4GHz 802.11b/g networks. The DWL-7100AP can operate as an Access Point, WDS, WDS with AP, Repeater or an AP Client. For compatibility with other D-Link AirPremier AG hardware, the DWL- 7100AP uses Wireless Distribution System (WDS) technology when running in Repeater mode.

  • Page 7: Features And Benefits

    Features and Benefits Using D-Link 108AG Technology, transfer rates reach up to 15x the speed of previous 802.11b wireless devices. Large data packets or bandwidth-intense Up to 108Mbps* with D-Link 108AG files can now be transferred smoothly without interruption. With 4x the number of Technology non-overlapping channels than a standard 802.11g device, you can increase the...

  • Page 8: Hardware Overview

    A steady light indicates a connection to the Ethernet port; LAN (10/100) a blinking light indicates activity WLAN A blinking light indicates activity in the respective wireless mode: (802.11a and 802.11b or 802.11g) 802.11a and/or 802.11b/802.11g D-Link DWL-7100AP User Manual...

  • Page 9: Installation

    The DWL-G650 Wireless Cardbus Adapter and the DWL-G520 Wireless PCI Adapter will connect, out of the box, with the DWL-7100AP, using their default wireless settings. Computers with 802.11b wireless adapters can also connect to the DWL-7100AP. D-Link DWL-7100AP User Manual...

  • Page 10: Installation Considerations

    Installation Considerations D-Link lets you access your network from anywhere you want. However, keep in mind, that range is limited by the number of walls, ceilings, or other objects that the wireless signals must pass through. Typical ranges vary depending on the types of materials and background RF noise in your home or business.

  • Page 11: Configuration

    Enter. Make sure that the IP addresses of the DWL-7100AP and your computer are in the same subnet. After the connection is established, Enter your user name (admin) and your password (leave blank by default). Click OK to continue. D-Link DWL-7100AP User Manual...

  • Page 12: Home

    Quick Installation Guide for more information regarding the Setup Wizard. These buttons appear on most of the configuration screens in this section. Please click on the appropriate button at the bottom of each screen after you have made a configuration change. D-Link DWL-7100AP User Manual...

  • Page 13: Wireless Modes

    WDS with AP Open System Shared Key Open System/Shared Key WPA-PSK WPA2-PSK WPA-Auto-PSK Open System Shared Key Open System/Shared Key WPA-PSK WPA2-PSK WPA-Auto-PSK AP Repeater Open System Shared Key AP Client Open System Shared Key WPA-PSK WPA2-PSK D-Link DWL-7100AP User Manual...

  • Page 14: Access Point Mode

    Select WPA-PSK to secure your network using a password and dynamic key changes (No RADIUS server required). Select WPA2-EAP to secure your network with the inclusion of a RADIUS server and upgrade the encryption of data with the Advanced Encryption Standard (AES). D-Link DWL-7100AP User Manual...
  • Page 15 Advanced Encryption Standard (AES). Select WPA-Auto-EAP to allow the client to either use WPA-EAP or WPA2-EAP. Select WPA-Auto-PSK to allow the client to either use WPA-PSK or WPA2-PSK. D-Link DWL-7100AP User Manual...

  • Page 16: Access Point (Wep)

    Valid Key: Select the 1st through the 4th key to be the active key. First through Fourth Input up to four keys for encryption. You will select keys: one of these keys in the valid key field. D-Link DWL-7100AP User Manual...

  • Page 17: Access Point (Wpa-Eap/Wpa2-Eap)

    1800 is the recommended value. A lower interval may reduce transfer data rate. Radius Server: Enter the IP address of the Radius server. Radius Port: Enter the Radius port. Radius Secret: Enter the Radius secret. D-Link DWL-7100AP User Manual...

  • Page 18: Access Point (Wpa-Psk/Wpa2-Psk)

    Enter a passphrase. The passphrase is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. Make sure you enter this key exactly the same on all other wireless clients. D-Link DWL-7100AP User Manual...

  • Page 19: Wds With Ap

    Auto Channel Scan: This option is unavailable in WDS with AP mode. Remote AP MAC Enter the MAC addresses of the APs in your Address: network that will serve as bridges to wirelessly connect multiple networks. D-Link DWL-7100AP User Manual...
  • Page 20 Select WPA-PSK, WPA2-PSK, or WPA-Auto-PSK to secure your network using a password and dynamic key changes (No RADIUS server required). Note: WDS is not completely specified in WiFi or IEEE standards. Communication with other vendor´s access points is not guaranteed. D-Link DWL-7100AP User Manual...

  • Page 21: Wds With Ap (Wep)

    * Hexadecimal digits consist of the numbers 0-9 and the letters A-F. ASCII (American Standard Code for Information Interchange) is a code for representing English letters as numbers 0-127. D-Link DWL-7100AP User Manual...

  • Page 22: Wds

    Auto Channel Scan: This option is unavailable in WDS. Remote AP MAC Enter the MAC addresses of the APs in your Address: network that will serve as bridges to wirelessly connect multiple networks. D-Link DWL-7100AP User Manual...
  • Page 23 Select Shared Key to limit communication to only those devices that share the same WEP settings. Select Open System/Shared Key to allow either form of data encryption. Select WPA-PSK, WPA2-PSK, or WPA-Auto-PSK to secure your network using a password and dynamic key changes (No RADIUS server required). D-Link DWL-7100AP User Manual...

  • Page 24: Wds (Wep)

    * Hexadecimal digits consist of the numbers 0-9 and the letters A-F. ASCII (American Standard Code for Information Interchange) is a code for representing English letters as numbers 0-127. D-Link DWL-7100AP User Manual...

  • Page 25: Ap Repeater

    Select Open System or Shared Key. Refer to the next page. Super G Mode/Super A Disabled by default. You can select Enable if the Mode: access point you are connecting to is using Super G or A mode. D-Link DWL-7100AP User Manual...

  • Page 26: Ap Repeater (Wep)

    * Hexadecimal digits consist of the numbers 0-9 and the letters A-F. ASCII (American Standard Code for Information Interchange) is a code for representing English letters as numbers 0-127. D-Link DWL-7100AP User Manual...

  • Page 27: Ap Client

    Select WPA-PSK or WPA2-PSK to secure your network using a password and dynamic key changes (No RADIUS server required). Super G Mode: Disabled by default. You can select Super G without Turbo or Super G with Dynamic Turbo. D-Link DWL-7100AP User Manual...

  • Page 28: Ap Client (Wep)

    * Hexadecimal digits consist of the numbers 0-9 and the letters A-F. ASCII (American Standard Code for Information Interchange) is a code for representing English letters as numbers 0-127. D-Link DWL-7100AP User Manual...

  • Page 29: Ap Client (Wpa-Psk/Wpa2-Psk)

    Enter a passphrase. The passphrase is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. Make sure you enter this key exactly the same on all other wireless clients. D-Link DWL-7100AP User Manual...

  • Page 30: Lan Settings

    Default Gateway: Enter the IP address of the gateway in your network. If there isn’t a gateway in your network, please enter an IP address within the range of your network. D-Link DWL-7100AP User Manual...

  • Page 31: Dynamic Ip Address

    DHCP server in your network. IP Address: This field is unavailable when DHCP is chosen. Subnet Mask: This field is unavailable when DHCP is chosen. Default Gateway: This field is unavailable when DHCP is chosen. D-Link DWL-7100AP User Manual...

  • Page 32: Advanced Performance Settings

    2346 is the default setting. RTS Length: This value should remain at its default setting of 2346. If you encounter inconsistent data flow, only minor modifications to the value range between 256 and 2346 are recommended. D-Link DWL-7100AP User Manual...
  • Page 33 Transmit Power: Choose full, half (-3dB), quarter (-6dB), eighth (-9dB), minimum power. Super Mode: Select Disable or Enable from the drop-down menu. Radio Wave: Select ON or OFF. D-Link DWL-7100AP User Manual...

  • Page 34: Filters

    Enter the MAC addresses that you wish to include in your filters list, and click Save. MAC Address List: When you enter a MAC address, it appears in this list. Click Delete next to a MAC address to remove it from the list. D-Link DWL-7100AP User Manual...

  • Page 35: Wlan Partition

    Enabling this feature allows Ethernet devices to communicate with wireless clients. If this is Access: disabled, all data from the Ethernet to associated wireless devices is blocked. Wireless devices can still send data to the Ethernet. D-Link DWL-7100AP User Manual...

  • Page 36: Grouping

    DWL-7100AP is disconnected, the Link Integrate option will cause the wireless segment associated with the AP to be disconnected from the AP. Select Enable or Disable. Ethernet Link Displays the status of the Ethernet connection. Status: D-Link DWL-7100AP User Manual...

  • Page 37: Dhcp Server

    Enter the IP address of the gateway on the network. Wins: Enter the number of IP addresses available for assignment. DNS: All devices in the network must have the same subnet mask to communicate. Enter the submask for the network here. D-Link DWL-7100AP User Manual...
  • Page 38 Enter the domain name of the DWL-7100AP, if applicable. (An example of a domain name is: www.dlink.com.) Lease Time : The Lease Time is the period of time before the DHCP server will assign new IP addresses. Status: Turn the Dynamic Pool Settings ON or OFF here. D-Link DWL-7100AP User Manual...

  • Page 39: Static Pool Settings

    Edit or delete the device in this list. Assigned MAC Enter the MAC address of the device here. Address: SubMask: Enter the subnet mask here. Gateway: Enter the IP address of the gateway on the network. D-Link DWL-7100AP User Manual...
  • Page 40 Enter the IP address of the Domain Name Server, if applicable. The DNS translates domain names such as www. dlink.com into IP addresses. Domain Name: Enter the domain name of the DWL-7100AP, if applicable. Status: This option turns the Static Pool settings ON or OFF. D-Link DWL-7100AP User Manual...

  • Page 41: Current Ip Mapping List

    DHCP server function has assigned static IP addresses. Binding MAC The MAC address of a device on the network that address: is within the DHCP static IP address pool. Assigned IP The current corresponding DHCP-assigned static address: IP address of the device. D-Link DWL-7100AP User Manual...

  • Page 42: Admin Settings

    Admin Settings User Name: Enter a user name. The default setting is admin. Old Password: Enter the current password (blank by default). New Password: Enter a new password and enter it again in the Confirm Password box. D-Link DWL-7100AP User Manual...

  • Page 43: System Settings

    System Settings Apply Settings and Click Restart to apply the system settings and Restart: restart the DWL-7100AP. Restore to Factory Click Restore to return the DWL-7100AP to its factory default settings. Default Settings: D-Link DWL-7100AP User Manual...

  • Page 44: Upgrade Firmware

    Update File: After you have downloaded the most recent version of the firmware from http://support.dlink. com to your hard drive, you can Browse your hard drive to locate the downloaded file. Select the file and click OK to update the firmware. D-Link DWL-7100AP User Manual...

  • Page 45: Configuration File

    Browse for the configuration settings that you have saved to your hard drive. Click OK after you have selected the settings file. Load Settings to the Click OK to save the selected settings to your Loacl Hard Drive: hard drive. D-Link DWL-7100AP User Manual...
  • Page 46 When you click Browse in the previous screen, the dialog box shown above appears. Select the file you wish to download and click Open. When this dialog box appears, click Save and select a location to save the configuration file. D-Link DWL-7100AP User Manual...

  • Page 47: Telnet Settings

    Telnet Settings Status: Check the enable box to allow a Telnet connection. Timeout: Select a time period after which a session timeout will occur. D-Link DWL-7100AP User Manual...

  • Page 48: Device Information

    Device Information Device Information: This window displays the settings of the DWL-7100AP, the firmware version and the MAC address. D-Link DWL-7100AP User Manual...

  • Page 49: Stats

    Stats WLAN 802.11g This window displays the statistics of the Traffic Statistics: IEEE802.11g network. WLAN 802.11a This window displays the statistics of the Traffic Statistics: IEEE802.11a network. D-Link DWL-7100AP User Manual...

  • Page 50: Client Information

    Band: Displays the wireless band. Authentication: Displays the type of authentication that is enabled. Signal: Receive Signal Strength Indicator indicates the strength of the signal Power Saving Mode: Displays the status of the power saving feature. D-Link DWL-7100AP User Manual...

  • Page 51: Help

    Help Help: Click on any item in the Help screen for more information. D-Link DWL-7100AP User Manual...

  • Page 52: Using The Ap Manager

    To launch the AP Manager: • Go to the Start Menu • Select Programs • Select D-Link AirPlus Xtreme AP Manager • Select DWL-7100AP Discovering Devices Click on this button to discover the devices available on the network.

  • Page 53: Device Configuration

    You cannot save a configuration file if you selected more than one device in the device list. The Exit button will close the device configuration window. Any settings that haven’t been applied will be lost. D-Link DWL-7100AP User Manual...

  • Page 54: General

    When enabled, the selected device(s) will function as a DHCP client(s). This allows them to receive IP configuration information from a DHCP server. When disabled, the access point(s) must have a static IP address assigned to them. D-Link DWL-7100AP User Manual...
  • Page 55 Check Enabled to use SNMP. SNMP is disabled by default. Public Community String: When SNMP is enabled, you may modify the public community string (read-only). Private Community String: When SNMP is enabled, you may modify the private community string (read-write). D-Link DWL-7100AP User Manual...

  • Page 56: Wireless Settings

    Beacon Interval Beacons are packets sent by an access point to (20~1000): synchronize a network. Specify the beacon value for the selected device(s) here. The default value of 100 is recommended. D-Link DWL-7100AP User Manual...
  • Page 57 The RTS value should not be changed unless you encounter inconsistent data flow. The default value is 2346. Tx Power: A drop-down menu for selecting the transmit power of the selected device(s). Auto Channel Scan: Enable this option to allow the access point to automatically scan for an available channel. D-Link DWL-7100AP User Manual...

  • Page 58: Security

    Select the key size (64-bit, 128-bit, or 152-bit) and key type (HEX or ASCII) and then enter a string to use as the key. The key length is automatically adjusted based on the settings you choose. D-Link DWL-7100AP User Manual...

  • Page 59: Wep Encryption

    Select the key size (64-bit, 128-bit, or 152-bit) and key type (HEX or ASCII) and then enter a string to use as the key. The key length is automatically adjusted based on the settings you choose. D-Link DWL-7100AP User Manual...

  • Page 60: Wpa-Eap/Wpa2-Eap/ Wpa-Auto-Eap

    1800 is the recommended setting. A lower interval may reduce transfer rates. RADIUS Server: Enter the IP address of the RADIUS server. RADIUS Port: Enter the port used on the RADIUS server (1812 is default). RADIUS Secret: Enter the RADIUS secret. D-Link DWL-7100AP User Manual...

  • Page 61: Wpa-Eap/Wpa2-Eap/ Wpa-Auto-Eap

    Group Key Update Select the interval during which the group key will Interval: be valid. 1800 is the recommended setting. A lower interval may reduce transfer rates. PassPhrase: Enter a PassPhrase between 8-63 characters in length. D-Link DWL-7100AP User Manual...

  • Page 62: Filters

    MAC address in the list are granted access. When Reject is selected, devices in the list of MAC addresses are not granted access. Access Control List: Add or Delete MAC addresses in the Access Control List. D-Link DWL-7100AP User Manual...

  • Page 63: Ap Mode

    • WDS • AP Repeater • AP Client Access Point, the default setting used to create a wireless LAN, is displayed here. Please see the following pages for an explanation of the other 4 AP modes. D-Link DWL-7100AP User Manual...

  • Page 64: Wds With Ap

    Allows you to connect multiple wireless LANs together while acting as an access point at the same time. This only works with other DWL-7100APs. If enabled, you must enter the MAC address of the other DWL-7100AP(s) on your network. D-Link DWL-7100AP User Manual...

  • Page 65: Wds

    Allows you to connect multiple wireless LANs together. All other LANs must be using DWL-7100APs. When enabled, you must enter the MAC address of the other DWL-7100AP(s) on your network (you can enter up to eight addresses). D-Link DWL-7100AP User Manual...

  • Page 66: Ap Repeater

    AP Repeater AP Repeater: Click on Site Survey and select the SSID that you want the AP to repeat or enter the MAC address manually of the access point you want to repeat. D-Link DWL-7100AP User Manual...

  • Page 67: Ap Client

    AP Client: Allows you to use the access point as a wireless client. Click on Site Survey and click on the SSID that you want the AP to connect to, or manually enter the root AP SSID. D-Link DWL-7100AP User Manual...

  • Page 68: Dhcp Server

    Enter the domain name of the DWL-7100AP, if applicable. (An example of a domain name is: www.dlink.com.) Lease Time : The Lease Time is the period of time before the DHCP server will assign new IP addresses. Status: Turn the Dynamic Pool Settings ON or OFF here. D-Link DWL-7100AP User Manual...

  • Page 69: Client-Info

    Band: Displays the wireless band. Authentication: Displays the type of authentication that is enabled. RSSI: Receive Signal Strength Indicator indicates the strength of the signal. Power Saving Mode: Displays the status of the power saving feature. D-Link DWL-7100AP User Manual...

  • Page 70: Log

    Check this box to enable logging. Activity: Select Enable or Disable from the drop-down menus. There are 3 types: System Activity, Wireless Activity, and Notice. Remote Syslog Enter the IP address of the Syslog server. Status Server IP: D-Link DWL-7100AP User Manual...

  • Page 71: Configuration Files

     A popup window will appear prompting you for a file name and location. Enter the file name, choose a file destination, and click Save. Note: You must always click Apply in the Configuration window if you want the settings to take effect. Device Configuration button. D-Link DWL-7100AP User Manual...

  • Page 72: Firmware

    Click on the firmware button as shown above. A popup window will appear. Locate the firmware upgrade file and click Open.  IMPORTANT! DO NOT DISCONNECT POWER FROM THE UNIT WHILE THE FIRMWARE IS BEING UPGRADED. D-Link DWL-7100AP User Manual...

  • Page 73: System Settings

    Auto Refresh: This setting allows you to enable auto refreshing of the network device list. By default this option is disabled. If you choose to enable it, you must enter the refresh interval in seconds. All other settings on this screen should be left at the default setting. D-Link DWL-7100AP User Manual...

  • Page 74: Setup Wizard

    Setup Wizard This button will launch the Setup Wizard that will guide you through device configuration. Click Next. D-Link DWL-7100AP User Manual...
  • Page 75 Enter a Password and retype it in the Verify Password field. Click Next. Enter the SSID and the Channel for the IEEE network. Auto Channel Scan is enabled by default. The access point will scan for the best available channel. Click Next. D-Link DWL-7100AP User Manual...
  • Page 76 If you want to enable Encryption, enter the Encryption values here. Click Next. Enter the SSID and the Channel for the IEEE network. Auto Channel Scan is enabled by default. The access point will scan for the best available channel. Click Next. D-Link DWL-7100AP User Manual...
  • Page 77 If you want to enable Encryption, enter the Encryption values here. Click Next. Click Finish to complete the setup. D-Link DWL-7100AP User Manual...

  • Page 78: Refresh

    Devices with a checkmark next to them are still available on the network. Devices with an X are no longer available on the network. About Click on this button to view the version of AP Manager. D-Link DWL-7100AP User Manual...

  • Page 79: Networking Basics

    IP Address Range.) To check on the IP Address of the adapter, please do the following:  Right-click on the Local Area Connection icon in the task bar.  Click on Status. This window will appear:  Click the Support tab.  Click Close. D-Link DWL-7100AP User Manual...

  • Page 80: Assigning A Static Ip Address In Xp/2000

    If you are not using a DHCP capable router, or you need to assign a static IP address, please follow these instructions: Go to Start.   Double-click on Control Panel.  Double-click on Network Connections. D-Link DWL-7100AP User Manual...
  • Page 81 IP address of 192.168.0.2, the other computers should have IP addresses that are sequential, like 192.168.0.3 and 192.168.0.4. The subnet mask must be the same for all the computers on the network.) D-Link DWL-7100AP User Manual...
  • Page 82  Input your DNS server addresses. Note: If you are entering a DNS server, you must enter the IP address of the default gateway. The DNS server information will be supplied by your ISP (Internet Service Provider.)  Click OK. D-Link DWL-7100AP User Manual...
  • Page 83 Go to Start > Run > type cmd. A window similar to this one will appear. Type ping xxx.xxx.xxx.xxx, where xxx is the IP address of the wireless router or access point. A good wireless connection will show four replies from the wireless router or access point, as shown. D-Link DWL-7100AP User Manual...

  • Page 84: Troubleshooting

     Do a Ping test to make sure that the DWL-7100AP is responding. Go to Start > Run > Type Command >Type ping 192.168.0.50. A successful ping will show four replies. Note: If you have changed the default IP address, make sure to ping the correct IP address assigned to the DWL-7100AP. D-Link DWL-7100AP User Manual...
  • Page 85 DNS server address you must also enter the default gateway address. (Remember that if you have a DHCP-capable router, you will not need to assign a static IP address. See Networking Basics: Assigning a Static IP Address.) D-Link DWL-7100AP User Manual...
  • Page 86 Make sure that the SSID on the access point and the wireless client are exactly the same. If they are not, wireless connection will not be established. Please note that there are two separate SSIDs for 802.11a and 802.11b. The default SSID for both 802.11a and 802.11b is default. D-Link DWL-7100AP User Manual...

  • Page 87: Technical Specifications

    • 36Mbps: -73dBm For 802.11a/g: • 48Mbps: -72dBm OFDM: • 54Mbps: -72dBm • BPSK @ 6 and 9Mbps • QPSK @ 12 and 18Mbps • 16QAM @ 24 and 36Mbps • 64QAM @ 48 and 54Mbps D-Link DWL-7100AP User Manual...
  • Page 88 For 802.11b: • 63mW (18dBm) • 40mW (16dBm) • 32mW (15dBm) • 23mW (13dBm) • 10mW (10dBm) • 6mW (7dBm) • 1mW (0dBm) For 802.11g: • 63mW (18dBm) • 40mW (16dBm) • 32mW (15dBm) • 6mW (7dBm) D-Link DWL-7100AP User Manual...

  • Page 89: Contacting Technical Support

    • Hardware Revision (located on the label on the bottom of the unit (e.g. rev A1)) • Serial Number (s/n number located on the label on the bottom of the unit). You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues.

  • Page 90: Warranty

    Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.
  • Page 91 Warranty Period and is subject to the same limitations and exclusions. If a material non-conformance is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid by the original licensee for the non-conforming Software will be refunded by D-Link;...
  • Page 92 • The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products sent COD will either be rejected by D-Link or become the property of D-Link. Products shall be fully insured by the customer and shipped to D-Link Systems, Inc., 17595 Mt.

  • Page 93: Limitation Of Liability

    RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NONCONFORMING PRODUCT.

  • Page 94: Fcc Statement

    The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. D-Link DWL-7100AP User Manual...
  • Page 95 This device has been designed to operate with an antenna having a maximum gain of 2 dB. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. D-Link DWL-7100AP User Manual...

  • Page 96: Registration

    Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 2.00 June 22, 2007 D-Link DWL-7100AP User Manual...

Table of Contents