Related Manuals for Haier HL22R3
Summary of Contents for Haier HL22R3
- Page 1 SCAN HDMI INPUT DISPLAY MENU MUTE VOL- VOL+ EXIT RECALL P.MODE SLEEP S.MODE MTS/SAP H.LOCK FREEZE SWAP MOVE FAVORITE...
- Page 2 Press H.LOCK to enter it and input the password correctly, the H.LOCK menu will appear on the screen(The initial password is 0000). Change password: The password can be changed. Press CH+/- to select Change password and VOL+/OK to enter. The screen will display New PW:----, then enter the new password and the screen display Confirm PW:----, if the same password is input correctly twice, the old password will be changed.
- Page 3 In this manual, the OSD (On Screen Display) may be different from your TV s because it is just an example to illustrate the TV operation. Press INPUT to select the input source, and the menu for each source is different. 1.
- Page 4 Reset : Reset all settings to factory mode.
- Page 5 Reset : Reset all settings to factory mode.
- Page 6 Menu Language Selection: The menus can be shown on the screen in the selected language. First select your language. 1. Press MENU button and VOL+/- until the following menu appears on the screen. 2. Press CH+/- button to enter the function menu and to go up and down to select the desired option .
- Page 7 DNR: Digital Noise Reduction. Reduces the appearance of digitizing errors caused by compression. Press VOL+/- to select On or Off.
- Page 8 1. Press MENU and VOL+/- button until the following menu appears on the screen. Note: This menu is only appears in TV mode . 2. Press CH+/- button to enter the turning menu and to go up and down to select the desired option .
- Page 9 1. Press MENU and VOL+/- button until the following menu appears on the screen. 2. Press CH+/- button to enter the turning menu and to go up and down to select the desired option . 3.Press VOL+/- button to adjust the selected option to your preference. Functions: Clock: Set the Correct time.
- Page 10 1. Press MENU and VOL+/- button until the following menu appears on the screen. Note: This menu is only appears in PC mode . 2. Press CH+/- button to enter the adjust menu and to go up and down to select the desired option .
- Page 12 PAL M, PAL N, NTSC M 2.5W+2.5W COMPONENT input, PC input, S-VIDEO input, External jack Audio input, Video input, Antenna input HDMI input, A/V out, PC Audio in, Headphone ~110-220V 50/60Hz...
- Page 13 V0.1 0090509049...