Table of Contents
Advertisement
Quick Links
TABLE OF CONTENTS
FOR YOUR SAFETY -------------------------------------------------- 1
SAFETY PRECAUTIONS --------------------------------------
SPECIAL NOTES ON LCD MONITORS -------------------
BEFORE YOU OPERATE THE MONITOR ---------------------
FEATURES -------------------------------------------------------- 3
PACKING LIST --------------------------------------------------- 3
INSTALLATION INSTRUCTIONS ---------------------------
CONTROLS AND CONNECTORS --------------------------
ADJUSTING THE VIEWING ANGLE -----------------------
OPERATING INSTRUCTIONS -------------------------------------
GENERAL INSTRUCTIONS ----------------------------------
HOW TO ADJUST A SETTING ------------------------------
ADJUSTING THE PICTURE ------------------------------
PLUG AND PLAY ----------------------------------------------- 12
TECHNICAL SUPPORT(FAQ) --------------------------------
APPENDIX ------------------------------------------------------------- 16
SPECIFICATIONS ------------------------------------------
FACTORY PRESET TIMING TABLE ---------------------
CONNECTOR PIN ASSIGNMENT ------------------------
For more information and help in recycling, please visit the following websites:
Worldwide: http://global.acer.com/about/sustainability.htm
2
3
3
4
5
6
7
7
9
10-11
13-14
15
16-17
18
19
Advertisement
Table of Contents
Related Manuals for Acer LCD Monitor 48cm(19”) TFT Color
Summary of Contents for Acer LCD Monitor 48cm(19”) TFT Color
-
Page 1: Table Of Contents
PLUG AND PLAY ----------------------------------------------- 12 TECHNICAL SUPPORT(FAQ) -------------------------------- 13-14 ERROR MESSAGE & POSSIBLE SOLUTION ------- APPENDIX ------------------------------------------------------------- 16 SPECIFICATIONS ------------------------------------------ 16-17 FACTORY PRESET TIMING TABLE --------------------- CONNECTOR PIN ASSIGNMENT ------------------------ For more information and help in recycling, please visit the following websites: Worldwide: http://global.acer.com/about/sustainability.htm... -
Page 2: For Your Safety
Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. -
Page 3: Safety Precautions
PRECAUTIONS Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. -
Page 4: Special Notes On Lcd Monitors
SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. -
Page 5: Installation Instructions
INSTALLATION INSTRUCTIONS SWIVEL BASE （only for AL1917） Install Remove Figure 1 Installing and Removing the Swivel Base Support Frame (only AL1917 h/AL1917 r) Do not perform a pulling or plugging action when the display is under slanting status to prevent the display from ejecting. Pull out the pin from the display support frame as per the figure and then adjust the height. -
Page 6: Controls And Connectors
CONTROLS AND CONNECTORS CABLE CONNECTIONS Turn off your computer before performing the procedure below. Plug the power cable of your monitor into a nearby outlet. Plug the other end of the power cord into the PC port. 2. Connect one end of the 15-pin VGA cable to the back of the monitor and connect the other end to the computer’s D-Sub port. -
Page 7: Adjusting The Viewing Angle
ADJUSTING THE VIEWING ANGLE (only for AL1917) For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. Hold the stand so you do not topple the monitor when you change the monitor’s angle. -
Page 8: Operating Instructions
OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences. •... -
Page 9: Front Panel Control
FRONT PANEL CONTROL • /Power Button: Press this button to turn the monitor ON or OFF, And display the monitor’s state. • Power Indicator: Green — Power On mode. Orange — Off mode. • MENU / ENTER : Activate OSD menu when OSD is OFF or activate/de-activate adjustment function when OSD is ON or Exit OSD menu when in Volume Adjust OSD status. -
Page 10: How To Adjust A Setting
HOW TO ADJUST A SETTING 1. Press the MENU-button to activate the OSD window. 2. Press < or > to select the desired function. 3. Press the MENU-button to select the function that you want to adjust. 4. Press < or > to change the settings of the current function. 5. -
Page 11: Adjusting The Picture
III. Dual-Input Model, Digital Signal Input ADJUSTING THE PICTURE The descriptions for function control LEDS Main Sub Menu Menu Description Menu Icon Item Icon Adjusts contrast between Contrast the foreground and background of the screen image. Adjusts the background brightness of Brightness the screen image. - Page 12 Language Multi-language selection. H. Position Adjust the horizontal position of the OSD. V. Position Adjust the vertical position of the OSD. Adjust the OSD timeout. Timeout Auto Adjust the H/V Position, Focus Auto Config and Clock of picture. (Only Analog- input Model) Analog Select input signal from analog (D-Sub).
-
Page 13: Plug And Play
PLUG AND PLAY Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. -
Page 14: Technical Support(Faq)
TECHNICAL SUPPORT (FAQ) Problem & Question Possible Solution Power LED is not on *Check if the Power Switch is in the ON position *Power Cord should be connected No Plug & Play *Check if the PC system is Plug & Play compatible *Check if the Video Card is Plug &... - Page 15 Screen image is not centered or sized *Adjust pixel frequency (CLOCK) and properly. FOCUS or press hot-key (AUTO) Picture has color defects *Adjust RGB color or select color (white does not look white) temperature Horizontal or vertical disturbances on *Use win 95/98 shut-down mode the screen Adjust CLOCK and FOCUS or perform hot- key (AUTO-key).
-
Page 16: Error Message & Possible Solution
ERROR MESSAGE & POSSIBLE SOLUTION CABLE NOT CONNECTED : Check that the signal-cable is properly connected, If the connector is loose, tighten the connector’s screws. Check the signal -cable connection pins for damage. INPUT NOT SUPPORT : Your computer has been set to unsuitable display mode, set the computer to display mode given in the following table (See page 18). -
Page 17: Appendix
APPENDIX SPECIFICATIONS Driving system TFT Color LCD LCD Panel Size 48cm(19") Pixel pitch 0.294mm( H ) × 0.294mm( V ) Brightness 300cd/m (Typical) Contrast 1000:1 (Typical) 178° (H) 178° (V) Viewable angle Response time 5 ms Input Video R,G,B Analog Interface Digital (Dual-Input Model) H-Frequency 30kHz –... - Page 18 • Switch Auto Adjust Key • < Volume • > Volume • Power Button • MENU External Controls: Functions • Contrast • Brightness • Focus • Clock • H.Position • V.Position • Language • Input signal Selection (Dual model only) •...
-
Page 19: Factory Preset Timing Table
Preset Display Modes HORIZONTAL VERTICAL STANDARD RESOLUTION FREQUENCY(kHz) FREQUENCY(Hz) 640 × 480 31.469 59.940 640 × 480 37.500 75.000 800 × 600 37.879 60.317 SVGA 800 × 600 46.875 75.000 1024 × 768 48.363 60.004 VESA 1024 × 768 56.476 70.069 1024 ×... -
Page 20: Connector Pin Assignment
CONNECTOR PIN ASSIGNMENT 15 - Pin Color Display Signal Cable PIN NO. DESCRIPTION PIN NO. DESCRIPTION Green Logic Ground Blue Monitor Ground Monitor Ground DDC-Serial Data DDC-return H-Sync R-Ground V-Sync G-Ground DDC-Serial Clock B-Ground (Dual-Input Model) 24 - Pin Color Display Signal Cable Meaning Meaning TMDS Data2-...