Hardware Monitor - Asus M2N-VM DH Manual

2.5.4

Hardware Monitor

The items in this sub-menu displays the hardware monitor values
automatically detected by the BIOS. It also allows you to change CPU Q-Fan
feature-related parameters. Select an item then press <Enter> to display
the configuration options.
Q-Fan Controller
CPU Target Temperature
System Target Temperature
CPU Temperature
System Temperature
CPU Fan Speed
Chassis Fan Speed
Power Fan Speed
Vcore
Vcc 12V
Vcc 3.3V
Vxx 5.0V
CPU Fan Type
CPU Fan Speed warning
↑↓ : Select Item
F1:Help
→←: Select Menu
ESC: Exit
Q-Fan Controller [Disabled]
Allows you to enable or disable the Q-Fan controller.
Configuration options: [Disabled] [Enabled]
CPU Target Temperature, System Target Temperature
Allows you to set the CPU and system target temperature. Key in to input
the value, then press <Enter>.
CPU Temperature, System Temperature
The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures. These items are not user-configurable.
CPU Fan Speed [xxxxRPM]
Chassis Fan Speed [xxxxRPM]
Power Fan Speed [xxxxRPM]
The onboard hardware monitor automatically detects and displays the CPU,
Chassis, and chip fan speeds in rotations per minute (RPM). If any of the
fans is not connected to the motherboard, the field shows 0. These items
are not user-configurable.
CPU Fan Speed warning [800 RPM]
Sets the CPU fan speed warning feature.
Configuration options: [Disabled] [800RPM] [1200RPM] [1600RPM]
ASUS M2N-VM DH
Phoenix-Award BIOS CMOS Setup Utility
Power
Hardware Monitor
[Disabled]
[60C/140F]
[60C/140F]
48ºC
41ºC
3068 RPM
0 RPM
0 RPM
[1.56V]
[11.58V]
[3.18V]
[5.05V]
[Auto]
[800 RPM]
-/+: Change Value
Select Menu
Item Specific Help
Press [Enter] to
enable or disable
F5: Setup Defaults
Enter: Select SubMenu
2-33