Dhcp Server - D-Link DNS-343 - NAS Server - Serial ATA-150 Product Manual

Section 3 - Configuration
The DNS-343 can be used as a DHCP Server. As a DHCP server, it can be used to serve IP addresses to devices on
your local network. However, this feature should not be enabled if you already have a DHCP server, such as a router
on your local network.

DHCP Server

Enables or Disables the DNS-343
DHCP Server.
Starting IP
Enter the starting IP address for the
Address
range of addresses assigned by the
DHCP server.
Ending IP
Enter the ending IP address for the
Address
range of addresses assigned by the
DHCP server.
Lease Time
Sets the duration of time that an IP
address will remain assigned to a
device.
Save Settings
Click on the Save Settings button to
apply and save the new settings.
D-Link DNS-343 User Manual
DHCP Server
4