Panel Facilities - Pioneer DVR-233-S Service Manual

5

8. PANEL FACILITIES

8.1 FRONT PANEL and DISPLAY
Front panel
STANDBY/ON VIDEO
1
1 STANDBY/ON
Press to switch the recorder on/into standby.
2 Front panel inputs
Audio/video inputs, convenient for connecting a video
camera.
3 Front panel display
See below for details.
4 IR remote sensor
ì REC
5
Press to start recording.
Display
1 2 3
12 11 10
1 PL
Lights when a PlayList is playing (only applicable to
some VR mode discs recorded on other recorders).
Lights when the component video output is set to
progressive scan.
2
Lights during playback; blinks when paused.
ì
3
Lights during recording; blinks when recording is
paused.
5
6
L(MONO) AUDIO R REC
INPUT 2
2 3 4 5 6 7
4 5 6
9
8 7
6
7
OPEN/
CLOSE
8 9 10
6
Press to stop playback or recording.
7
Press to start or restart playback (press while playing to
pause playback).
8 +/–
Use to change TV channels, skip chapters/tracks, etc.
9 OPEN/CLOSE
Press to open/close the disc tray.
10 Disc tray
4 OVER
Lights when the analog audio input level is too high.
5 V
Lights when an unfinalized Video mode disc is loaded.
6
Lights when a timer recording has been set. (Indicator
blinks if the timer has been set but there isnít a
recordable disc loaded.)
7
Indicates which channels are recorded when Dual Mono
is selected.
8 SAP
Lights when the currently selected TV channel has a
Second Audio Program channel.
9 Character display
Shows disc time information, channel number,
messages, and so on.
10 R / RW
Indicates the type of recordable DVD loaded: DVD-R or
DVD-RW.
11 2 3
Shows the remote control mode (if nothing is displayed,
the remote control mode is 1).
12 PM
Lights to indicate PM (after midday) for the clock display.
DVR-231-S
7
8
A
B
C
D
E
F
75
8