Using the viewfinder (continued)
Adjusting the screen display
1
Set the POWER switch to ON. (Page 30)
2
Press the MENU button.
•
Menu operation (Page 40)
•
Operations may also be performed
using buttons on the remote control that
correspond to those on the camera. For
details, see "Description of parts (Remote
control)". (Page 3)
3
Select YES for the EVF SET item in the
setting menu SW&DISP SETUP screen, and
press the ENTER button.
4
Press the up or down button of the cursor
button to select the item you want to set,
and then press the ENTER button.
5
Press the left or right button of the cursor
button to adjust the numerical value of the
selected item.
6
Select ENTER and press the ENTER button.
•
Select EXIT and press the ENTER or the
MENU button to finish configurations.
34
•
The viewfinder display can be in color or black
and white. (See the setup menus, SW&DISP
SETUP screen, EVF COLOR.) The resolution
is the same for both of them.
•
The menu will be displayed in color even if
black and white is selected.