Recording Setup Screen - Panasonic AG-AF100A Operating Instructions Manual

Setup menu list (continued)

RECORDING SETUP screen

Item
(Camera)
PREREC
MODE
INTERVAL REC (Camera)
(Camera)
RELAY REC
(Camera)
PH AUDIO
MODE
(Camera)
MIC ALC
(Camera)
MIC GAIN1
(Camera)
MIC GAIN2
56
Display
mode
Sets PRE RECORDING to ON or OFF.
ON: Enables PRE REC function.
OFF: Disables PRE REC function.
• TCG is set to FREE RUN.
• Cannot be set when you are using INTERVAL REC.
Scenes moving slowly over a long period of time are recorded as short movies
by providing a recording interval. One frame is recorded in each recording time
period that has been set, and 24 frames (PAL 25 frames) form a one-second
video. When you set INTERVAL REC, the following items are set automatically:
PH Mode
• TC RECRUN
• Audio recording is not performed.
OFF, 1SECOND, 10SECONDS, 30SECONDS, 1MINUTE, 2MINUTES
ON: Relay recording performed. When the SD card used for recording has
no remaining space, recording continues in another SD card if an SD
card that can be used for recording is inserted in another SD card slot.
OFF: Relay recording not performed. Recording stops when the target SD
card has no remaining space.
Selects the format of audio recording when REC FORMAT = PH.
LPCM: Recording is performed in uncompressed LPCM.
AC3: Recording is performed in Dolby AC3 format.
• Fixed to AC3 for other than the PH mode.
• If LPCM is set, playback is not possible in our previous models, such as AG-
HMR10.
ON: Enables mic level auto control.
OFF: Disables mic level auto control.
Audio distortion can be reduced at high input levels. To adjust the recording level
of audio signals (regardless of this setting), use the AUDIO control knobs.
Sets the input level of the external microphone connected to the INPUT 1
terminal.
-50dB, -60dB
Sets the input level of the external microphone connected to the INPUT 2
terminal.
-50dB, -60dB
Description of settings
1080/24P (When SYSTEM FREQ = 59.94)
1080/25P (When SYSTEM FREQ = 50)
Fixed to NDF
indicates the factory setting.