Changing Channels; Adjusting The Volume - Acer AT4202P User Manual

Setup Wizard
Step 5. Setup is now complete. You are ready to begin watching TV.
If you leave the setup process before it is complete, you will be given a choice of options:
2
1. Resume setup
2. Resume setup at next startup
3. Exit and don't remind me
Select an option and press OK to exit.

Changing channels

3

Adjusting the volume

4
Setup may vary due to local broadcast differences.
AT4202P.EU.EN.indb 13
a. Press 0-9 on the remote control to select a channel. Only
the channel 1~9 will change after 2 seconds. Press ENTER to
select the channel immediately.
b. Pressing the channel (CH) up/down button on the remote
control will also change the channel.
Adjust the volume level using the (VOL) up/down button on
the remote control.
13
3/8/2006 9:12:51 PM