Netware 6.5 Sp5 Installation (With Integrated Sas Hardware Raid); Raid Utility Installation; Drivers Required - Acer Altos R720 Installation & Configuration Manual

Altos R720 Installation Configuration Guide
2. Change the directory to the driver source and install the driver
# cd /tmp/src/
# make install
# insmod e1000.ko
3. Run the YaST2 utility.
# YaST2
4. Select Network Devices -> Network Card, it will auto detect the Intel
82563EB network controller and help you to configure it.

RAID Utility Installation

You can find the RAID Web Console 2 in EasyBUILD 7.1 build 100. Please
1.
refer to directory of the RAID Web Console 2 in Software Required
section and copy the utility from the EasyBUILD 7.1 build 100 to HDD first.
# mount /media/dvdram
# cp –R /media/dvdram/app/r720/raid/Integrated_SAS/Linux/.
/tmp
Install RAID Web Console 2 utility
2.
# cd /tmp/
# unzip ir3_Linux_RWC2_v1.13-00.zip
# chmod 755 install.sh
# chmod 755 RunRPM.sh
# ./install.sh
Type y to accept the license agreen and select 1 for full installation.
3.
To start RAID Web Console 2, click on start button, select System -> More
4.
Programs -> RAID Web Console 2 Startup UI
NetWare 6.5 SP5 Installation (with integrated SAS hardware
RAID)
Below information describes how to manually install NetWare 6.5 (Support
Pack 5 overlay CD) on Altos R720 with integrated SAS hardware RAID.

Drivers Required

For NetWare 6.5 SP5 installation with integrated SAS hardware RAID, the
following device drivers are required.
Device
Integrated SAS
hardware RAID
84
Version EasyBUILD Version
1.00.07 EasyBUILD 7.1 build 100 (or later)