Model 743 - HP Model 744 - VME Workstation Manual

Setting Your Graphics Configuration
When you see a message similar to the following clearly and legibly, select that
monitor type by pressing
Path
–––––––––
GRAPHICS(0)
Press [RETURN] to select this monitor type (type n of n types).
Confirm your selection by typing
process.

Model 743:

a.
When the Boot Console Handler's (BCH's) Main Menu is displayed, press
Enter
The PATH CONFIGURATION menu is then displayed.
b.
Press
The CONSOLE PATH menu is then displayed.
c.
The BCH designation for each graphics device depends on which graphics options
are installed on your Model 743 SBC. They may be designated as GRAPHICS 1,
GRAPHICS 2, or GRAPHICS 3.
For systems with an HP-RT operating system, please refer to the X11 SERVERrt
Installation and Configuration Guide for information to determine your system's
graphic configuration.
3–8
Enter
Slot Head Type
–––– –––– ––––
0 1 n
3
to select Console Path.
Enter
Size Freq
–––––––– ––––
nnnnnnnn nnHz
Y
when prompted. The system continues its boot
Class
–––––
2