Chapter 2 Installing The Fwd Scsi Adapter - HP Model 744 - VME Workstation Installation And Service Manual

Chapter 2
Installing the FWD SCSI Adapter
This chapter describes how to install the FWD SCSI adapter. Before beginning the
hardware installation, you must complete the tasks in Chapter 1. The tasks for installing
the FWD SCSI adapter are as follows:
Remove the single board computer (SBC).
For a Model 743 SBC, install new Boot ROM, if required.
Remove a blank cover.
Install FWD SCSI card.
Replace the single board computer.
Connect the disk drive(s).
CAUTION: The FWD SCSI adapter is susceptible to electrostatic shock. When
handling your graphics option board, always wear the
static–grounding wrist strap that came in the kit. Always handle
printed circuit boards carefully.
2–1