Connecting This Unit And A Device On The Network - Panasonic HX-A100D Owner's Manual

Entering SSID to connect to an access point
Enter SSID (Wireless network name) and password of your access point to connect this unit to the
access point.
Preparation: Connect this unit with the smartphone.
1
Check the SSID and password of your access point.
≥ The SSID and password of the access point (e.g. a wireless broadband router) you use are
described on the access point device or in its manual. For details, refer to the access point
manual.
2
# [Camera Wi-Fi settings] # [AP mode setup] # [Set
Tap
connect. dest.] on the Image App screen and enter the SSID and
password of your access point (Step1).
3
Press the Wi-Fi/WPS button continuously to change
the Wi-Fi mode lamp to [
≥ The Wi-Fi mode lamp [
≥ Wi-Fi mode lamp [

2 Connecting this unit and a device on the network

1
Connect a smartphone or a DLNA-compatible device to the access
point.
≥ Connect with an SSID connection or a WPS connection. For information on the connection
method, refer to the operating instructions for your device or access point.
2
When connecting to the smartphone
From the Image App, tap
unit from the connection destination list.
≥ When the connection is complete, control this unit from the Image App.
When connecting with a DLNA-compatible device
On the DLNA device, select this unit from the list of devices that are
connected to the access point.
≥ Refer to the operating instructions of your DLNA-compatible device.
≥ Refer to page
43 for how to play back on a DLNA-compatible TV.
≥ An access point connection cannot be started during motion picture recording.
≥ If you remove the microSD card while this unit is in playback mode, Wi-Fi mode will turn off and
this unit will lose the connection to the access point.
≥ To disconnect from the access point, press the Wi-Fi/WPS button and turn off the Wi-Fi mode
lamp.
].
] flashes.
] will turn on when the connection is completed.
(l 17)
# [Set connect. dest.], and tap this
- 42 -