Replicate Configuration - HP LC2000r - NetServer - 128 MB RAM User Manual

Chapter 10
The NOS installation process, whether automated or manual, is the same as in
Express configuration mode:
For Manual NOS Installation Only: Before you perform a manual NOS
installation, you must print instructions and manually create NOS-specific
drivers diskettes, as follows:
Create Drivers Diskette(s): On the Create Drivers Diskette(s) screen,
select Create Drivers Diskette(s) to create one or more customized
diskettes containing HP drivers and configuration files to use when
you install the NOS.
Print and Read Instructions: You may already have done this directly
from the Custom Configuration menu option Show NOS Instructions.
If not, on the Show NOS Installation Instructions screen, select Save
to Disk to copy the Network Operating System Installation
Instructions to disk. Then print them out from the disk. Read the
instructions first, and then follow them to manually install the NOS.
Install NOS:
Automated NOS Installation: For certain versions of Novell NetWare /
IntranetWare or Microsoft Windows NT Server, Configuration
Assistant partitions and formats the hard disk drive, and Installation
Assistant guides you through the NOS installation and configures the
NOS with the appropriate drivers for the HP-bundled configuration.
Manual NOS Installation: Follow the instructions on the screen and
the Network Operating System Installation Instructions that you
printed out.

Replicate Configuration

In Replicate configuration mode, you can save a copy of your current system
configuration or load a previously saved configuration. This method saves time
when configuring multiple, identical systems. Select Replicate on the
Configuration Assistant menu.
72
Configuring the NetServer