Memory Configuration; Video Memory - Dram; Hp Netserver Le System Updates; Loading Dos In A 640K Environment If The Base Memory Size Is Set To 512K - HP LC2000r - NetServer - 128 MB RAM Handbook

Hp netserver service handbook, volume 2 - mid
Hide thumbs Also See for LC2000r - NetServer - 128 MB RAM:
Table of Contents

Advertisement

Memory Configuration

You can install any HP supported 4 MB, 8 MB, 16 MB, and 32 MB SIMMs in any socket and any
arrangement.

Video Memory - DRAM

Install two additional DRAM chips to upgrade the server to 512 KB of RAM which lets the display use
resolutions of 640x480 with 256 colors and 800x600 with 256 colors.
Use video memory DRAM chips that are 16-pin DIP (Dual Inline Package) 256 KBx4 Fast Page Mode DRAM
and run at 80 nanoseconds or faster. The chips must be compatible with the Trident TVGA 9000B controller
chip.
Trident has tested the following DRAM:
Vendor
Part Number
Goldstar
GM71C256A-80 9103
Intel
P2101-09 K049A
Mitsubishi M5M44256AP-8 8492
NEC
D424256C-80 8939

HP NetServer LE System Updates

These notes reflect changes for the HP NetServer LE which could not be included with the service manual or
were changed at a later date. Service manuals are not updated and the information, if any, in this section is
the latest information available.

Loading DOS in a 640K environment if the base memory size is set to 512K.

When the base memory size is set to 512K, you will not be able to run the "Configure computer" option from
SAM. To create the proper operating environment so that "Configure computer" option will run, you must
modify the CONFIG.SYS file found on the NetServer #1 diskette.
The System Administration Manager CONFIG.SYS file on NetServer #1 diskette originally contains the
following lines:
COUNTRY=001, , A:\COUNTRY.SYS
DEVICE=A:\DISPLAY.SYS CON:=(, 437, 2)
DEVICE=HIMEM.SYS
SHELL=A:\SAM.EXE /P
Using the editor of your choice, modify the CONFIG.SYS file so it appears as follows:
DEVICE=A:\SET640K.SYS
COUNTRY=001, , A:\COUNTRY.SYS
DEVICE=A:\DISPLAY.SYS CON:=(, 437, 2)
DEVICE=HIMEM.SYS
SHELL=A:\SAM.EXE /P
Save the file when you finish.
Creating the Proper Operating Environment
1. Insert NetServer #1 diskette in drive A.
Vendor
NMBS
AAA1M304P-08 9130
Samaung
MK44C256AP-8 104
Vitalic
V52C104AP-80 9105
Part Number
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents